Berenson Swagger Series 12-5/8" (320 mm) Center to Center Slate Pull, - 2412-1SLT-P
Description
SWAGGER PULL 320MM CC SLATE For Cabinets
The SWAGGER PULL 320MM CC SLATE is a Berenson Swagger Series cabinet pull that uses a 320 mm center to center layout, giving a long, continuous grip that works well on wider cabinet doors and drawer fronts. Its 12-5/8 inch length creates strong visual alignment across multiple fronts, which helps layouts look consistent on banks of drawers. The handle uses a contemporary style, so it suits modern cabinet lines where straight runs and clean geometry matter. A slate finish defines the color tone, keeping the pull visually grounded while coordinating with other slate-finished components on the job. The pull is made from zinc, providing a solid metal body that supports repeated daily operation on active doors and drawers. A 2412-1SLT-P manufacturer part number clearly ties this pull to the Swagger Series line, which helps standardize selections across a project.
Key Swagger Series Pull Details For Projects
- The 320 mm center to center dimension spaces mounting points for longer fronts, which helps spread load across the panel and supports use on tall pantry doors or wide drawers.
- The 13-1/16 inch overall length extends beyond the mounting centers, giving extra hand contact area that can be aligned visually with neighboring cabinets for a consistent run.
- A 1-1/4 inch projection sets the pull off the face of the cabinet, creating working clearance between fingers and the door surface that supports comfortable operation.
- The 15/16 inch hand clearance dimension defines the actual usable gap behind the bar, which matters when users operate the pull with larger hands or from an angle.
- The 5/8 inch width keeps the grip slim while still providing a defined edge, helping the pull sit neatly on face frames or slab fronts without looking oversized.
- A 1/2 inch base diameter keeps the footprint compact at each end, which can be useful when laying out pulls near panel edges or narrow rail sections.
Installation Details For This 320 mm Slate Pull
This Berenson Swagger Series pull uses a 320 mm center to center measurement, so hole locations follow that fixed distance for consistent alignment along a run of fronts. The pull is designed for use with 8-32 x 1 inch screws, which ties into common cabinet drilling setups and supports mounting through typical door and drawer thicknesses. With a 1-1/4 inch projection and 15/16 inch hand clearance, the installed pull stands off the surface enough to grip without knuckles contacting the cabinet face, which is useful on deeper profile doors. The 13-1/16 inch overall length gives clear reference for setting reveals to edges and adjacent hardware, helping layouts track straight across a kitchen or casework run.
Using The Berenson Swagger Series Pull In Work
Where This Berenson Swagger Series Pull Fits
This Berenson Corporation Swagger Series pull is designed for decorative hardware applications on cabinets and casework, so it works in projects that call for handles and pulls rather than knobs. The contemporary style supports use on modern kitchens, baths, and built-ins where straight lines and minimal profiles are part of the design intent. With its 12-5/8 inch length and 320 mm center to center layout, the pull suits wider drawers, appliance panels, and tall doors that benefit from a longer gripping area. The slate finish positions the pull within a darker, muted color range, which coordinates well with many wood tones and painted cabinet finishes on residential or commercial installations.
Details That Support Consistent Results On Installs
The 320 mm center to center measurement gives installers a fixed drilling dimension, which helps repeat the same layout across multiple cabinets without recalculating spacing. Using an 8-32 x 1 inch screw standard simplifies hardware planning, because this size aligns with common cabinet construction thicknesses. A 1-1/4 inch projection and 15/16 inch hand clearance combine to create a defined working gap behind the pull, which reduces hand contact with the cabinet surface when doors or drawers are operated frequently. The 5/8 inch width and 1/2 inch base diameter allow the pull to sit neatly on narrow rails or slab fronts, supporting tighter reveals near panel edges. The zinc material provides a consistent metal body for the pull, which supports the feel of a solid handle during everyday use in active spaces.
Common Questions About This Slate Cabinet Pull
What are the mounting measurements on this pull?
The pull has a 320 mm center to center dimension, so mounting holes are spaced 320 mm apart, which sets a clear drilling pattern for longer doors and drawers.
How long is the Berenson Swagger Series pull overall?
The Berenson Swagger Series pull has a 13-1/16 inch overall length, which provides a long gripping area and strong visual presence on wider cabinet fronts.
What material is the 2412-1SLT-P cabinet pull made from?
The 2412-1SLT-P cabinet pull is made from zinc, giving the handle a metal construction that supports repeated everyday operation on doors and drawers.
What finish does this 320 mm center to center pull have?
This 320 mm center to center pull has a slate finish, which sets a darker, muted tone that coordinates with many cabinet colors and surfaces.
How far does this cabinet handle project from the door?
The cabinet handle projects 1-1/4 inch from the door surface, creating working space for fingers behind the pull during everyday opening and closing.
What screw size is this Berenson slate drawer pull designed for?
This Berenson slate drawer pull is designed for 8-32 x 1 inch screws, which aligns with common cabinet construction and drilling setups.
Selecting This Slate Pull For Your Project
The Berenson Swagger Series 2412-1SLT-P pull combines a 320 mm center to center layout, 12-5/8 inch length, and contemporary slate finish to suit modern cabinet runs. When a project calls for a long, zinc cabinet handle with defined hand clearance and a consistent drilling pattern, this SWAGGER PULL 320MM CC SLATE is a practical option to match multiple doors and drawers across the same job.