Berenson Advantage 4" (102 mm) Center to Center Polished Chrome Pull, - 6140-226-P
Description
Berenson Advantage 4 Inch Pull For Cabinets
Berenson Advantage 4 inch pull is a zinc cabinet handle with a polished chrome finish, so it provides a bright, clean look while using a sturdy metal body that stands up well on frequently used cabinet doors and drawers. The 4 inch center to center drilling sets the posts at a common cabinet spacing, which streamlines layout when you are running multiple doors in a kitchen, bath, or shop installation. The overall length of 4-5/16 inches leaves a slight overhang beyond the screw centers, giving a comfortable gripping area without crowding adjacent hardware on narrower fronts. A projection of 1-1/4 inches brings the handle far enough off the face for fingers to hook easily, which helps users open heavier drawers with a secure hold. The 5/16 inch width keeps the profile slim, supporting a simple wire pull style that works well across many cabinet styles.
Key Berenson Advantage Pull Details For Projects
- The zinc material gives this pull a solid metal construction, which supports repeated daily use on high-traffic cabinets in kitchens, baths, or workrooms where hardware is handled constantly.
- The polished chrome finish creates a reflective surface, which pairs well with modern appliances and fixtures while also making it straightforward to visually match other chrome hardware in the same space.
- The 4 inch center to center dimension matches a commonly used drilling pattern, which simplifies planning for new cabinet layouts and helps when aligning multiple pulls along long drawer runs.
- The 4-5/16 inch overall length provides a proportional look on standard drawer fronts, which helps maintain consistent visual lines when this pull is repeated across a full bank of doors and drawers.
- The 1-1/4 inch projection spaces the handle away from the cabinet face, which gives fingers room behind the pull so users can grip firmly without knuckles rubbing the door or drawer surface.
- The 5/16 inch width maintains a narrow, wire-style profile, which keeps the pull from feeling bulky on smaller fronts while still offering enough surface for a comfortable grasp.
Mounting And Screw Size Information For This Pull
The 4 inch center to center drilling on this Berenson Advantage 4 inch pull establishes the hole spacing for mounting, which is useful when laying out new fronts or reusing existing 4 inch on-center holes during replacement work. The specified screw size of 8-32 x 1 inch identifies the threaded connection into the zinc pull, which helps match the correct machine screw pattern to standard cabinet door and drawer front thicknesses. The 1-1/4 inch projection works with this mounting layout to set the pull at a comfortable stand-off from the front, which supports smooth operation once the handle is fastened in place.
Using This Berenson Advantage Pull In Your Work
Where This 4 Inch Center Pull Fits Best
The 4 inch center to center dimension on this Berenson Advantage 4 inch pull aligns well with many cabinet drilling patterns, which supports use on both new cabinetry and jobs where existing 4 inch spaced holes are already present. The zinc material suits interior cabinet environments, which makes this pull appropriate for kitchens, bathrooms, laundry rooms, and shop cabinets where metal hardware is standard. The polished chrome finish gives a bright, mirrored look, which pairs with contemporary door styles and matches other polished chrome components around sinks, appliances, or shop fixtures. The 4-5/16 inch overall length keeps the pull in proportion on typical drawer fronts and doors, which helps create a consistent visual rhythm when you run the same hardware across an entire room of cabinets.
Details That Support Consistent Results And Layout
The defined 4 inch center to center spacing on this Advantage wire pull polished chrome handle sets a clear drilling reference, which helps maintain straight lines and even spacing when you are installing long rows of pulls. The 1-1/4 inch projection establishes how far the grip stands off the surface, which allows you to anticipate clearance around adjacent trim or neighboring doors during layout. The 5/16 inch width keeps the handle visually light, which is helpful when you are trying to avoid a heavy look on smaller drawer faces or narrow doors. The specified 8-32 x 1 inch screw size pairs with the threaded mounting points in the zinc body, which standardizes the connection and supports consistent pull alignment across multiple cabinets.
Common Questions About The Berenson Advantage Pull
What are the key dimensions of the Berenson 6140-226-P pull?
The Berenson Advantage 6140-226-P pull has a 4 inch center to center dimension, an overall length of 4-5/16 inches, a projection of 1-1/4 inches, and a width of 5/16 inch, which guides layout and fit choices.
What material is this Berenson Advantage 4 inch pull made from?
The Berenson Advantage 4 inch pull is made from zinc, which gives it a solid metal construction suited to repeated cabinet door and drawer use in interior spaces.
What finish does the Berenson polished chrome pull have?
The Berenson polished chrome pull uses a polished chrome finish, which creates a bright, reflective surface that coordinates easily with other polished chrome hardware and fixtures.
How far does this zinc cabinet pull stand off the door?
This zinc cabinet pull has a projection of 1-1/4 inches, which spaces the grip off the door or drawer face so fingers can hook behind it comfortably when opening.
What screw size is specified for the Berenson 6140-226-P pull?
The Berenson 6140-226-P pull uses an 8-32 x 1 inch screw size, which matches the threaded mounting points in the pull body for secure cabinet installation.
How does the 4 inch center to center help cabinet layouts?
The 4 inch center to center drilling provides a common spacing standard, which simplifies measuring and drilling when aligning multiple pulls across cabinet doors and drawer banks.
Select This Pull For Consistent Cabinet Runs
The Berenson Advantage 4 inch pull combines a zinc body, polished chrome finish, and 4 inch center to center spacing, so it supports uniform hardware runs across kitchens, baths, or shop cabinets. The defined dimensions of 4-5/16 inch length, 1-1/4 inch projection, and 5/16 inch width give clear planning numbers for layout and drilling. For projects where a polished chrome wire-style handle fits the design, this pull offers a straightforward way to standardize look and feel throughout the installation.