Berenson ZZ Series 4" (102 mm) Center to Center Polished Brass Pull, - 6150-203-P
Description
Berenson ZZ Series 4 Inch Pull For Cabinets
Berenson ZZ Series 4 inch pull gives a 4 inch center to center mounting layout, which matches common cabinet drilling and keeps replacement work straightforward on existing doors and drawers. The pull is part of the Advantage Wire Pulls collection and Value series, so it follows a consistent style when you are matching other pieces from the same line on a project. A contemporary style shape keeps the look clean on modern casework while still working with many standard cabinet fronts. The pull is made from steel, so it provides a solid metal feel at the hand point and holds up under regular cabinet opening and closing in kitchens, baths, or shop fixtures. A polished brass finish brings a bright brass appearance that stands out against painted or stained fronts. This combination of steel construction and polished brass finish supports both function and visual continuity across multiple cabinets.
Key Advantages Of This Polished Brass Pull
- The 4 inch center to center dimension sets a predictable hole spacing, which speeds layout on new faces and helps align with many existing bore patterns during changeouts.
- The polished brass finish creates a bright brass surface, which lets the pull read as a deliberate design element on both light and dark cabinet finishes in a project.
- The steel material gives a firm, rigid pull body, which supports daily operation on frequently used doors or drawers without a light or flimsy feel.
- The 1-1/2 inch projection holds the gripping point off the face of the cabinet, which provides finger room while helping fronts stay clear of contact marks from hands.
- The 15/16 inch hand clearance dimension defines the open space behind the pull, which helps hands fit comfortably between the wire shape and the door or drawer surface.
- The 1 inch width at the pull adds a stable grip area, which gives users a defined surface to grab and control heavier drawers or wider doors.
Installation Details For 4 Inch Center Pull
This Berenson 6150-203-P cabinet pull uses a 4 inch center to center measurement, so drill points fall 4 inches apart on the cabinet face, which keeps hole layout simple during installation or upgrades. The pull uses an 8-32 x 1 inch screw size, so the threaded interface matches standard cabinet hardware practice and supports straightforward mounting into typical door and drawer thicknesses. A base diameter of 5/16 inch defines the footprint where the pull meets the surface, which helps cover the drilled holes and sets a clean transition from the cabinet front to the wire body. With a 1-1/2 inch projection, the pull stands out from the case just enough to balance hand access with a compact profile, which is useful when working near adjacent walls or appliances.
Using This Berenson Pull In Cabinet Projects
Where This 4 Inch Brass Pull Fits Best
The Berenson ZZ Series 4 inch pull is part of the Advantage Wire Pulls collection and Value series, which positions it well for use across full kitchen, bath, or built-in runs where a consistent look matters. Its contemporary style suits projects that favor clean lines on cabinet faces, so it works on slab fronts as well as simple framed doors. The polished brass finish puts a bright metal tone on the cabinet, which can complement traditional brass hinges or contrast with neutral casework colors. A length or diameter listed as 13-1/2 inch defines the overall span of the pull body, which makes the piece read visually across the width of typical drawer fronts. This longer wire span gives multiple hand positions along the pull, which is helpful on wider drawers that are opened from different spots.
Details That Support Consistent Cabinet Results
The 4 inch center to center layout on this steel wire pull supports repeatable drilling across a bank of doors and drawers, which keeps reveals and lines visually consistent. Using the 8-32 x 1 inch screw size standardizes fastener selection, which streamlines on-site work when multiple pulls are being set in one session. The 1-1/2 inch projection and 15/16 inch hand clearance work together to define the working space between the cabinet face and the grip, which helps hands wrap around the pull without brushing the door surface. A 1 inch width and 5/16 inch base diameter provide a defined contact patch on the front, which helps the pull sit flush and visually balanced on narrow or wider rails. Because the pull is made from steel with a polished brass finish, it carries the feel of solid metal while presenting a brass appearance that can be carried across matching hardware on the same job.
Common Questions About This Berenson Cabinet Pull
What is the center to center size on this pull?
The Berenson ZZ Series 4 inch pull has a 4 inch center to center dimension, which sets the spacing between mounting holes and aligns with common cabinet drilling patterns.
What material and finish does this cabinet pull use?
The pull is made from steel with a polished brass finish, which provides a solid metal feel while presenting a bright brass look on cabinet doors and drawers.
How far does the Berenson 6150-203-P pull project?
The Berenson 6150-203-P pull projects 1-1/2 inches from the cabinet face, which provides finger clearance while keeping the hardware profile relatively compact.
What hand clearance does this Advantage Wire Pulls handle provide?
This Advantage Wire Pulls model provides 15/16 inch hand clearance behind the pull, which defines the open space for fingers between the wire and the cabinet surface.
Which screw size works with this polished brass pull?
The pull uses an 8-32 x 1 inch screw size, which matches a common cabinet hardware thread and length for mounting through typical door and drawer fronts.
What overall size details define this Berenson pull?
The pull has a 4 inch center to center, 1-1/2 inch projection, 1 inch width, 15/16 inch hand clearance, and a 5/16 inch base diameter, which together describe how it will sit and feel on cabinets.
Select This Pull For Consistent Cabinet Layout
The Berenson ZZ Series 4 inch pull in polished brass combines steel construction, a 4 inch center to center layout, and a contemporary Advantage Wire Pulls profile, giving you predictable drilling, solid feel, and a coordinated brass look across your cabinet run. Using this Berenson 6150-203-P cabinet pull on your next job aligns your mounting pattern, finish, and grip dimensions from piece to piece, which supports clean lines and a unified appearance on doors and drawers.