Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Advantage pull 96mm center to center is a zinc wire-style cabinet pull in a satin nickel finish, so it brings a clean, modern look to doors and drawers while matching other satin nickel decorative hardware in the same run. The 3-3/4 inch center to center dimension, noted as 96 mm, gives a familiar hand feel that works well for most residential and light commercial cabinet layouts. Its 4-1/16 inch overall length keeps the pull visually balanced on typical drawer fronts, supporting consistent layout lines from one cabinet face to the next. The 1-1/4 inch projection keeps hands clear of the cabinet surface during use, which helps reduce fingerprints and smudging around the hardware contact area. A 5/16 inch width offers a slim, wire-like profile that sits lightly on the face of the cabinet, which matters when a project calls for minimalist decorative hardware that does not overpower the door or drawer design.
This Berenson Advantage Series cabinet pull uses a 96 mm center to center hole spacing, which aligns well with common cabinet drilling patterns when laying out hardware on doors and drawers. The manufacturer specifies a screw size of 8-32 x 1 inch, so the pull is designed to work with a standard machine thread that matches many cabinet applications where the door or drawer front thickness suits that length. With a projection of 1-1/4 inch, the installed pull provides working clearance between the hand and the cabinet face, which helps during repeated opening when hands approach from different angles. The 4-1/16 inch overall length gives a clear reference for spacing each pull a consistent distance from door edges, helping keep lines straight across a bank of cabinets. Combined with its 5/16 inch width, the wire-style profile sits close to the surface while still offering enough grip area for straightforward installation and regular operation.
This Berenson Advantage Series 3-3/4 inch (95 mm) cabinet wire pull, with its 96 mm center to center dimension, fits projects that follow metric-based drilling but still read well on inch-based drawings, which is common in mixed-standard shops. The satin nickel finish makes it suitable for cabinets that coordinate with satin nickel hinges or other decorative hardware elements, keeping the project visually unified. At 4-1/16 inches in overall length, the pull works well on typical kitchen drawers and doors, where hardware must sit comfortably within rail and stile dimensions without crowding panel details. The 1-1/4 inch projection is practical on face-frame and frameless cabinets alike, because it provides enough stand-off for fingers while still keeping the pull close to the door face. Its slim 5/16 inch width keeps the appearance light, so it works on narrow drawer fronts or utility cabinets where a heavier handle might look oversized.
The 96 mm center to center measurement on this Berenson 6244-2BPN-P satin nickel pull means installers can repeat hole locations across an entire job, which supports efficient drilling and predictable alignment from cabinet to cabinet. The specified 8-32 x 1 inch screw size aligns with standard cabinet hardware threading, so the pull is ready for typical shop or site hardware operations that rely on that thread type. With its 4-1/16 inch overall length, the pull has enough span for a comfortable three-finger grip on wider drawers, which helps users open heavier contents without pinching near the mounting posts. The 1-1/4 inch projection balances clearance and compactness, offering room for different hand sizes while keeping the pull from protruding excessively into walk paths along cabinet runs. The 5/16 inch width concentrates the hand contact along a narrow bar, which can feel precise when pulling smaller drawers or upper cabinet doors that do not require a bulky handle.
This Berenson Advantage pull has a 96 mm center to center spacing, which helps match common cabinet drilling patterns when setting up jigs and templates for repetitive installs.
The Berenson 6244-2BPN-P pull has an overall length of 4-1/16 inches, giving a proportion that fits standard cabinet doors and drawers without crowding adjacent design details.
This satin nickel wire pull projects 1-1/4 inches from the cabinet face, creating useful finger clearance while keeping the hardware profile relatively low on the door or drawer.
The Berenson Advantage Series pull is made from zinc, giving it a metal construction that supports a solid grip and pairs well with the satin nickel finish.
This Berenson cabinet pull is specified for 8-32 x 1 inch screws, aligning with standard machine-thread cabinet hardware used on many doors and drawers.
The wire-style bar on this pull has a 5/16 inch width, producing a slim profile that looks minimal while still giving enough surface to grasp comfortably.
The Berenson Advantage Series 3-3/4 inch cabinet pull in satin nickel pairs a 96 mm center to center layout with zinc construction, giving a practical combination of familiar drilling and solid grip for doors and drawers. Its 4-1/16 inch length, 1-1/4 inch projection, and 5/16 inch width work together to support a consistent, streamlined look across cabinet runs. For projects that call for satin nickel decorative hardware with a wire-style profile, this Berenson 6244-2BPN-P pull offers dimensions that support repeatable installation and everyday use.
Sold In: 1 Each