RE25 decorative wire grill from Kent Design and Manufacturing is a decorative metal grill sheet designed for woodworking and casework projects that call for metal grill detail. This grill is supplied in a 36 x 48 sheet, so it arrives as a predictable flat panel size that fits typical cabinet door, panel, or custom millwork layouts where a standard sheet dimension simplifies layout and cutting. The material is described as wire grill with .1875 mesh, so the wire pattern is set at roughly 3/16 inch openings, which creates a consistent decorative field that still allows visual access or airflow where an open panel is desired. The finish is listed as antique brass, so the wire surface carries a warm brass tone that supports traditional or classic design schemes on cabinetry and furniture projects.
This RE25 AB 36X48 wire grill is produced in 36 x 48 sheets, which gives installers and fabricators a fixed panel footprint to work from when planning cut sizes and frame openings. Because the grill uses a .1875 mesh wire pattern, the small, even openings contribute to a uniform look across every cut piece taken from the sheet, which keeps multiple doors or panels visually consistent on a bank of cabinets. The decorative metal grill classification signals that this panel is suited for decorative openings in doors, ends, or custom panels, where the wire field functions as the visible center rather than a hidden component. With an antique brass finish applied to the wire, the panel brings a warm metallic tone that can coordinate with other antique brass details in a woodworking installation.
The RE25 decorative wire grill sits in the decorative hardware and moldings category under wire/grill steel panels, so it aligns naturally with cabinet, furniture, and architectural millwork work where metal grills are specified as focal elements. The 36 x 48 sheet format suits situations where a fabricator cuts multiple smaller inserts from a single panel, such as a run of upper cabinet doors with grill centers. Because the grill is described as decorative metal grill, it is oriented toward visible openings rather than hidden structural roles, so it plays best in framed door panels, decorative wall inserts, or custom display cases where the mesh pattern is meant to be seen. The antique brass finish supports design schemes that call for a brass-toned accent, allowing this sheet to visually tie into antique brass knobs, pulls, or trim elements listed in the same decorative hardware and moldings family.
The .1875 mesh notation on this RE25 AB 36X48 wire grill defines the mesh opening at roughly 3/16 inch, so the pattern is tight enough to read as a continuous decorative field while still allowing visual depth behind the panel. For installers and cabinet shops, that fixed mesh size means every cut section carries the same spacing, which keeps the look consistent even when different door sizes are pulled from the same 36 x 48 sheet. The 36 x 48 designation also tells you the starting blank size, so cut planning, yield calculations, and layout work can be done around a known sheet dimension before fabrication starts. As a decorative metal grill in antique brass, the sheet adds both pattern and color in a single component, which streamlines the selection of a grill solution when a brass-tone, wire-based insert is called out on drawings or specifications.
The RE25 decorative wire grill is made in 36 x 48 sheets, giving fabricators a standard panel size for planning cut sizes and for laying out multiple grill inserts from a single sheet.
The RE25 decorative wire grill lists .1875 mesh, indicating mesh openings of about 3/16 inch, which produces a small, even pattern suited to decorative cabinet or furniture panels.
The RE25 decorative wire grill is described as antique brass, so the wire surface has a brass-tone finish that coordinates with other antique brass decorative hardware and moldings.
The RE25 decorative wire grill falls under decorative hardware and moldings as a decorative metal grill in the wire/grill steel panels group, guiding selection within that product class.
The RE25 AB 36X48 decorative wire grill is produced by Kent Design and Manufacturing, providing a specific brand reference for repeat orders or matching on future projects.
The RE25 AB 36X48 designation ties to the RE25 pattern in antique brass finish and a 36 x 48 sheet size, helping buyers align the correct mesh, finish, and dimensions for their work.
The RE25 decorative wire grill in antique brass from Kent Design and Manufacturing delivers a defined combination of .1875 mesh, 36 x 48 sheet size, and decorative metal grill classification, so it clearly targets visible grill applications in woodworking. Because it sits within decorative hardware and moldings as a wire/grill steel panel, it slots easily into cabinet and furniture projects that already specify metal grills as part of the design intent. When a project calls for antique brass grill detail with a small, regular mesh pattern, choosing the RE25 AB 36X48 model provides a consistent, repeatable option grounded in a specific part number from a recognized decorative metal grill line.
Sold In: 1 Each