Hettich 12" Full Extension Soft-Close Ball Bearing Drawer Slides KA 5632 Series, Unhanded Side Mount Zinc - 9221505

Hettich 12 Inch Full Extension Soft Close Drawer Slides

Hettich 12 inch full extension soft close drawer slides provide a 12 inch full extension action that lets the drawer travel its full length, which gives access to the entire drawer depth during everyday cabinet use and installations. The 66 lbs load rating supports drawers up to 66 lbs, so medium-duty cabinet drawers stay on track under normal kitchen, bath, or shop storage loads. The side mount design fits in standard side mount slide layouts, helping installers keep a consistent approach across a run of cabinets. The soft close function is described as cushioned in the features, which slows the closing motion and reduces impact at the front of the cabinet. Positive in and out stops manage travel at both ends of the slide, keeping the drawer from overrunning its track during regular opening and closing. The detent in feature holds the drawer in the closed position, which helps doors and drawer fronts stay visually aligned along a cabinet face.

Key Slide Details That Shape Drawer Performance

• The 1/2 inch side clearance allows a standard 1/2 inch gap between drawer side and cabinet, which simplifies sizing drawer boxes to common cabinet construction measurements.
• The 2-9/32 inch slide height gives a fixed profile size, which helps when laying out drawer side heights and checking that the slide profile clears openings and adjacent hardware.
• The side mount installation style places the slides on the cabinet sides, giving predictable alignment points along the length of the drawer for consistent reveals and motion.
• The 32 mm pattern with holes in 32 mm increments supports drilling on a 32 mm cabinet system, which speeds layout in frameless and system-based cabinet production.
• The first hole setback at 37 mm from the front edge aligns with common system boring, so front mounting points land where many jigs and line-boring patterns expect them.
• The unhanded design means the same slide works on either side, which reduces part sorting on the bench and keeps left and right drawer members interchangeable.

Installation Details For KA 5632 Side Mount Slides

The KA 5632 side mount design uses 1/2 inch side clearance, so drawer boxes can be sized with a consistent 1/2 inch deduction per side relative to the opening width in typical cabinet work. The 2-9/32 inch height keeps the slide profile compact, which helps where drawer openings are tight but still must carry a 66 lbs load. Holes laid out in a 32 mm pattern provide regular mounting points that match many shop boring patterns, helping slides land square along cabinet sides. The first hole setback at 37 mm from the front edge supports alignment with front edges and hardware reveals. The drawer member trigger disconnect allows the drawer member to separate from the cabinet member, which simplifies mounting the cabinet member and then reconnecting the drawer for final fit and adjustment.

Using KA 5632 Slides In Everyday Cabinet Builds

Where These Hettich KA 5632 Slides Fit Best

The KA 5632 slide in this 12 inch length is identified by manufacturer part number 9221505, which ties this exact model into Hettich KA 5632 series planning and replacements. The 66 lbs capacity matches many residential cabinet drawers that carry dishes, utensils, bathroom supplies, or shop parts without exceeding the rated load. The 1/2 inch side clearance and side mount configuration line up well with standard cabinet openings, so drawer box widths can follow predictable formulas in both face-frame and frameless construction that use similar side gaps. The 2-9/32 inch height helps when drawers sit in a stack, because the profile leaves room above and below for slide overlap while still delivering full extension. The soft close cushioned action supports drawers in kitchens or baths where quieter closing is valued, while positive in and out stops keep the travel distance controlled.

Details That Support Repeatable Drawer Results

The full extension ball bearing design lets the drawer extend its full 12 inch length, which keeps the back of the drawer accessible and reduces the need to oversize drawer depth to reach stored items. The ball bearing mechanism manages motion smoothly along the slide length, supporting consistent opening and closing when the load is within the 66 lbs rating. The 32 mm pattern with holes at 32 mm increments ties into 32 mm cabinet systems, which enables repeatable hole locations and simplifies production using line-bored case sides. The 37 mm first hole setback relates directly to common system distances from the cabinet front, aiding front alignment of the slide relative to door and drawer front reveals. The unhanded configuration allows installers to pull from a single stock location for both left and right sides, which streamlines assembly and reduces orientation errors at the bench. The drawer member trigger disconnect means the drawer can be lifted off after fitting, which supports finishing, adjustments, or service without disturbing cabinet-side fasteners.

Common Questions About Hettich KA 5632 Drawer Slides

Selecting Hettich 12 Inch Slides For Your Drawers

The Hettich 12 inch full extension soft close drawer slides KA 5632 series provide a 66 lbs rated, side mount option with 1/2 inch side clearance and a 2-9/32 inch height that fits many cabinet layouts. The 32 mm pattern with 37 mm first hole setback integrates into system-bored cabinets, while the ball bearing full extension action and cushioned soft close support smooth, accessible drawers. When a project calls for 12 inch travel with controlled motion and standard 1/2 inch side gaps, this KA 5632 configuration aligns well with typical cabinet drawer dimensions and workflow.