350mm Undermount Drawer Slide For Shallow Frameless Cabinet Drawers

The Hettich Actro YOU is a full-extension, soft-close undermount drawer slide for frameless cabinets, built on ball-bearing steel construction and finished in zinc. This left-hand cabinet member is sized for 350mm drawer boxes and carries a 40 kg (88 lb) load rating per pair, making it a capable choice for the shorter drawers found in lower vanity banks, spice pull-outs, and shallow base cabinet applications.

Key Features

• Full extension brings the entire drawer box out to the cabinet face, so every inch of storage is reachable.
• Integrated soft-close catches the drawer at the end of travel and settles it shut quietly without a damper add-on.
• 40 kg (88 lb) load rating per pair handles heavily loaded shallow drawers with margin to spare.
• Ball-bearing construction on steel members delivers smooth, consistent travel across the life of the drawer.
• Left-hand orientation — pair with the matching right-hand member to complete one drawer installation.
• Fits drawer side thickness from 1/2 inch to 5/8 inch, giving flexibility across thin-sided drawer box materials.

Where This Slide Fits

The 350mm length is a natural fit for drawer boxes in shorter runs: bathroom vanity banks, bedside cabinets, laundry room base units, and the narrow spice or tray drawers flanking a kitchen range. At 350mm, the slide suits a frameless cabinet with an interior depth that matches the nominal drawer length — plan for the slide's minimum installation depth before cutting the box. Because the slide reaches full extension, the back of a shallow drawer is just as accessible as the front, which matters in a spice pull-out where the last jar in back is the one you need.

Construction and Finish

Steel members with a zinc finish give this slide the corrosion resistance needed for indoor cabinetry that sees humidity variation — bathroom vanities and laundry rooms especially. Ball bearings run between the cabinet and drawer members for motion that stays smooth under load and does not degrade as the drawer cycles. The soft-close mechanism is integrated into the slide, so there is no separate damper to source, align, or replace later. This is a left-hand cabinet member; the right-hand member and both drawer members are required to complete a working pair.

Who Specifies the Actro YOU

Cabinet shops running production frameless boxes in the 350mm depth range will find the Actro YOU sized right for the work without paying for premium features they do not need. Designers specifying handle-less or soft-close kitchens and baths benefit from the integrated damping, which removes a separate accessory order. Contractors replacing worn slides in existing frameless vanities can match the 350mm nominal length and the 1/2 to 5/8 inch side-thickness window to a wide range of existing drawer boxes. The slide is intended for dry indoor environments; it is not rated for exterior or wet-area installation.

The Right Slide for a Shorter Drawer Done Right

A 350mm drawer in a frameless cabinet deserves the same smooth pull and quiet close as any full-depth run — the Actro YOU delivers both in a steel ball-bearing slide sized for exactly that job.