Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich America Fixing Screw for 18mm–19mm shelf thickness is a purpose-built assembly screw designed to mount Hettich shelf hardware securely to cabinet panels in that specific thickness range. The 18mm length and fine thread are matched to the panel depth, so the screw seats fully without over-penetrating or falling short of proper engagement.
This screw is the right choice when you are installing Hettich shelf supports, brackets, or related hardware into cabinet panels that fall in the 18mm to 19mm thickness range. That dimension covers the standard metric panel thickness common in European-style cabinetry and most import cabinet lines. The 18mm screw length is calibrated to that stock so the threaded shank engages the panel completely, pulling the hardware plate tight to the face without the tip breaking through the back. For shops running Hettich hardware on 18mm or 19mm carcass material, this screw keeps installs consistent from one cabinet to the next.
The galvanized coating protects the steel shank in the low-humidity, enclosed conditions of a finished cabinet interior. Fine thread delivers tight, stable engagement in the pre-drilled or hardware-specified hole, resisting loosening under the repeated load cycles a loaded shelf produces over time. The flat head mates cleanly against the recessed seat of Hettich mounting plates, and the #2 Phillips recess is the standard drive found on every installation crew's bit set. There are no nibs on the underside of the head — the hardware plate itself provides the bearing surface, so a smooth flat head is the correct specification here.
Cabinet shops working in metric panel dimensions — particularly 18mm melamine, MDF, or plywood carcass stock — deal with a narrow window between enough thread engagement and too much penetration depth. A screw a few millimeters too long risks breaking through a finished interior face; too short and pull-out resistance suffers. This screw eliminates that judgment call for 18mm–19mm panels. It is a natural fit for production shops building European-style frameless cabinets, for millwork teams installing Hettich shelf systems in commercial casework, and for finish carpenters completing kitchen or bath cabinet installations where Hettich hardware is already specified.
This screw is sized for cabinet panels in the 18mm to 19mm thickness range, which corresponds to standard metric panel stock used in European-style and import cabinetry.
Fine thread provides denser engagement in the hardware-specified hole and resists loosening under the repeated load of a shelf in use. It is the appropriate thread form for this type of hardware mounting application.
This screw is sourced and specified by Hettich for their shelf hardware systems. Compatibility with other brands depends on whether those products share the same mounting hole diameter and head seating geometry. Confirm against the hardware manufacturer's specifications before substituting.
Yes. The galvanized coating provides corrosion resistance appropriate for dry, enclosed cabinet interiors. It is not rated for exterior or high-moisture environments.
A standard #2 Phillips bit. That is the most common bit size in cabinet installation and general woodworking, so no specialty tooling is required.
When the shelf panel is 18mm to 19mm and the hardware is Hettich, this fixing screw is the straightforward choice — the right length, the right thread, and the right head to complete the installation cleanly.
Sold In: 1 Each