
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
WingLine L runner profile gives you a dedicated sliding door hardware component designed for Hettich WingLine L systems, so you can build or service sliding fronts with a part that matches the intended runner profile geometry and function.
The 2400mm WingLine L runner profile length supports long sliding door runs or multiple shorter sections from one bar, which helps on larger cabinet or closet projects where a continuous runner profile is required across wider openings.
This WingLine L runner profile is specified as screw on, so it is designed to be fastened to the cabinet or structure with screws through the profile, giving you a mechanical connection that resists movement once fixed in place along the run.
The runner profile is supplied in an anodized version, so the surface has an anodized finish on the aluminum profile, which supports a more uniform appearance along visible edges and offers a treated surface where the running components interface.
The part is supplied by Hettich America Corporation under manufacturer part number 9237917, which ties directly to the WingLine L sliding door hardware program and helps you match project documentation or planning lists to the specific runner profile specified for the job.
This WingLine L runner profile is configured for screw on installation, so the profile is secured by driving screws through the profile into the supporting cabinet or structure, creating a direct, positive connection that holds the sliding track in its designed position.
The screw on positions are described as pre drilled on the runner profile, giving you defined fixing points along the 2400mm length that guide where screws are driven, which saves marking time and supports consistent spacing between fixings on repeated installations.
Because the runner profile is part of the WingLine L sliding door hardware class, it is intended to act as the running track element for that system, so once fixed at the correct setback on the cabinet, the corresponding WingLine L components can engage the profile along its anodized surface.
The 2400mm bar length means the runner can extend across wide cabinet runs without joints, so when mounted in a single piece, it can provide a continuous path for sliding components along the full width of the installation.
The WingLine L runner profile belongs to the sliding door hardware category, so it is used wherever a WingLine L sliding front is planned, such as cabinets or other furniture elements that require doors to slide rather than hinge in front of the opening.
As a 2400mm long runner profile, it is suited to runs where the hardware needs to span a long cabinet or a group of carcasses, so a single profile can bridge across those units and support the motion of multiple sliding fronts set on the same line.
The runner profile is identified in the SAP description as WL L RUNNER PROFILE,2400MM L,SCREW ON,AD, which signals that it is the designated track component for WingLine L within Hettichs sliding door hardware offering when an anodized, screw-fixed runner profile is required.
Because the profile is part of builders hardware and sliding door hardware classes, it is intended for integration into millwork or casework where sliding fronts are built into the design, giving you a defined track element that aligns with the rest of the hardware schedule.
The anodized version of the profile allows it to sit in visible or semi-visible locations within cabinets, since the treated surface supports a finished look that is consistent with other anodized aluminum components in modern casework projects.
The 2400mm WingLine L runner length reduces the number of joints in the running surface on long installations, which helps maintain smooth travel for the sliding components because they do not encounter interruptions or misalignments between shorter pieces.
Having screw on positions pre drilled along the runner profile simplifies layout, as the fixing line is effectively established by those holes, so the installer can fasten the profile consistently from cabinet to cabinet without repeatedly marking and measuring each location.
The screw on configuration means the runner profile is mechanically fastened into the cabinet structure, which helps it resist shifting under the dynamic loads of sliding doors during regular use, supporting long-term alignment of the sliding front relative to the cabinet.
An anodized finish on the runner profile provides a stable interface where moving hardware components contact the track, which supports predictable sliding behavior and preserves the visual quality of the track area across the width of the run.
The clear manufacturer part number 9237917 connects the runner profile to the specific WingLine L configuration documented by Hettich America Corporation, which helps fabricators, estimators, and installers keep their hardware selections synchronized with drawings and bill-of-material notes.
Positioning this runner profile within the Sliding Door Hardware product class means it is intended as a working component in a complete WingLine L installation, so when it is specified alongside matching hardware, the overall system layout follows the hardware families intended geometry.
The WingLine L runner profile has a 2400mm length, which allows it to span long cabinet runs or be cut for multiple openings that share the same sliding hardware line.
The WingLine L runner profile is a screw on design, so it is fastened by driving screws through the profile into the supporting cabinet or structure along the pre-defined fixing line.
The pre drilled screw on positions give ready-made fixing points along the runner, guiding screw placement and helping maintain consistent spacing and alignment across repeated installations.
The WingLine L runner profile is described as anodized, providing a treated surface along the track that supports a uniform appearance and a stable interface for the sliding components.
This runner profile is part of the WingLine L sliding door hardware family from Hettich America Corporation, identified under manufacturer part number 9237917.
The 2400mm sliding runner suits cabinetry or furniture projects requiring WingLine L sliding fronts across wider spans, where a long, continuous runner profile is needed along the cabinet line.
The 2400mm WingLine L runner profile from Hettich America Corporation gives you an anodized, screw on running track designed for the WingLine L sliding door hardware program, so your projects align with the specified system components.
With its 2400mm length, screw on installation, and pre drilled fixing positions, this runner profile supports efficient layout and reliable mounting on cabinets that use WingLine L sliding fronts.
For sliding door hardware work where a defined WingLine L runner profile is required, this 9237917 anodized profile provides the track element that connects the cabinet structure to the moving fronts in a coordinated system.
Sold In: 1 Each