Flush-Trim Bit 1/2 Shank gives you a Kreg Tool router bit designed to pair with the Kreg Corner Routing Guide set, so you can form consistent corner profiles using your preferred router setup on cabinet and woodworking projects. The bit is specified for use only with the Kreg Corner Routing Guide, which means its profile and bearing layout are matched to that guide for predictable, repeatable routing passes on corners that need a clean, flush finish. As a router bit in the Kreg system, it fits into a 1/2 inch shank router collet, providing a solid grip that supports smoother cuts when you are working on corner treatments or edge detail work.
The Flush-Trim Bit is specified for use in a router table, handheld router, or trim router, so you can match the setup to the size of the workpiece or jobsite constraints without changing bits. Top and bottom bearings on the bit let you reference from either face of the workpiece with the Kreg Corner Routing Guide, which helps when grain direction or part orientation dictates how you approach a cut. The bit is listed for 1-1/8 inch to 1-3/8 inch material thickness, so those dimensions define the practical thickness window where the cutting length and bearing layout support full engagement.
This Flush-Trim Bit is a router bit in the Bits, Blades and Cutters trim bits class, so it is aimed at trimming and profiling rather than rough stock removal, which fits cabinet and casework detailing. When used with the Kreg Corner Routing Guide in a router table, the specified 1-1/8 inch to 1-3/8 inch material thickness range lines up well with typical assembled panel or frame thicknesses, so the cutter engages the full edge when forming a corner profile. Using the same bit with a handheld or trim router means the Kreg Corner Routing Guide can follow corners on installed or larger pieces, with the top and bottom bearings giving you a reference from either the face or edge as the job requires.
The top and bottom bearings on this Kreg Tool flush trim router bit control the cut path against the Kreg Corner Routing Guide, which reduces wandering and helps produce the same corner shape from piece to piece. Dual carbide-tipped blades on the PRS500 bit hold a sharp cutting edge across repeated passes on 1-1/8 inch to 1-3/8 inch thick material, which supports cleaner surfaces that are closer to ready for finishing work. The maximum RPM rating of 24,000 defines the upper spindle speed for the bit, giving a clear operating ceiling when you match router speed to material and cut quality expectations. A 1/2 inch shank design increases the contact area in the router collet compared with smaller shanks, which supports smoother operation when the bit is trimming along corners guided by the Kreg Corner Routing Guide in table-mounted or handheld setups.
The Flush-Trim Bit 1/2 Shank is listed for use in a router table, handheld router, or trim router, giving flexibility to match the routing method to the workpiece and workspace.
The Kreg Tool flush trim router bit is designed to pair with the Kreg Corner Routing Guide set and is noted for use only with the Kreg Corner Routing Guide for matched corner profiling.
The Kreg PRS500 flush trim bit is specified for 1-1/8 inch to 1-3/8 inch material thickness, aligning the cutting length and bearing placement with that thickness window.
The top and bottom bearings on this flush trim bit let the cutter follow the Kreg Corner Routing Guide from either face, supporting controlled, repeatable corner profiles.
Dual carbide-tipped blades on this trim bit provide cutting edges that stay effective longer, supporting smoother cuts and reducing the need for frequent bit changes.
This flush trim router bit has a maximum RPM rating of 24,000, setting the upper spindle speed limit when you set up your router for corner profiling.
The Flush-Trim Bit 1/2 Shank from Kreg Tool provides a router bit configured for the Kreg Corner Routing Guide, so the cutter and guide system align for controlled corner profiles. With top and bottom bearings, dual carbide-tipped blades, and a 1/2 inch shank, the bit is built for guided trimming on 1-1/8 inch to 1-3/8 inch material thickness in router table, handheld, or trim router setups. Selecting this PRS500 bit for your Kreg Corner Routing Guide work keeps the guide-and-bit combination matched for consistent, flush corner routing on cabinetry and woodworking jobs.
Sold In: 1 Each