Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12' Single Track 1201 is an aluminum extruded sliding door track designed for long, straight door runs where a continuous top guide matters. The 12 foot length lets installers span wider openings with a single piece, which reduces joint points along the track and helps maintain smoother sliding motion over the full run. As part of the Sliding Door Hardware category from Hettich America Corporation, this track serves as the guiding rail within a sliding assembly, giving doors a defined path so they move predictably. The track follows the 1201 profile, so jobs calling for that specific track geometry can match plans and repeat earlier installations. Being a single track, it supports one sliding path in linear applications, which suits straightforward cabinet or door layouts where a single rail is sufficient.
This aluminum extruded track uses predrilled holes along its 12 foot length, so the fastening pattern is already set when the rail arrives at the jobsite. That layout allows installers to position the track, reference the existing holes, and fasten in sequence, which helps hold alignment over the span. Because the track serves as the sliding guide within a door assembly, accurate positioning along the opening directly affects how the panels travel. Using the fixed hole pattern as a reference helps keep the rail straight relative to the cabinet or wall surface, supporting smoother motion. The 1201 profile also means that when a project is specified around this track type, installers can mount it knowing the geometry matches the intended hardware setup.
The 12' Single Track 1201 is suited to sliding door applications that call for a single linear track with a defined 1201 profile. In cabinet or architectural sliding openings that extend close to 12 feet, the continuous aluminum extruded rail lets installers cover the span without cutting multiple shorter sections, which is useful when a project benefits from fewer seams across the doorway. Because the track is classified under Sliding Door Hardware, it is geared toward assemblies where a guided path is required above or within a structure. The predrilled holes along the 12 foot length give consistent fastening points, which is valuable when track alignment must match layout lines across a longer cabinet face or wall-mounted run.
The 12 foot length of this Hettich sliding door track 1201 allows a single piece to act as the guiding member across wide openings, which helps keep the travel path uniform and reduces the chance of misalignment where two shorter tracks would otherwise meet. The aluminum extruded construction delivers a consistent internal shape from end to end, so rollers or glides designed for this geometry encounter the same interface throughout the slide. Predrilled holes help installers maintain that consistency during mounting, since each fastening point is located along the factory pattern, supporting a straight installation line when working across long casework or framing. The defined Single Track 1201 profile also matters when following plans or replacing an existing Hettich 50126 rail, because matching the profile keeps the door hardware interaction the same as the original design.
The 12' Single Track 1201 is aluminum extruded, giving a consistent cross-section that supports smooth contact with compatible sliding components along the full track length.
The 12 foot length allows a single continuous track across wide openings, which reduces joint locations and supports more uniform sliding action over the span.
The predrilled holes provide preset fastening points along the track, which helps installers position and secure the rail in a straight line without separate hole layout.
This track is identified by manufacturer part number 50126 and the name 12' Single Track 1201, which helps match drawings and repeat the same component on future jobs.
The track is listed under Sliding Door Hardware from Hettich America Corporation, so it serves as the guiding rail component within a sliding door assembly.
The Single Track 1201 designation indicates a specific track profile, which helps align with projects or replacements that call out that exact geometry in their hardware schedules.
The 12' Single Track 1201 from Hettich America Corporation combines aluminum extruded construction, predrilled holes, and a 12 foot continuous length to support controlled sliding door movement. For projects specified around the Single Track 1201 profile or Hettich part number 50126, choosing this track aligns the installed rail with the intended geometry and fastening layout. When a sliding door opening benefits from a single, uninterrupted guiding member, this aluminum single track provides the defined path needed for consistent travel across the span.
Sold In: 1 Each