Topline Grant 7007 Double I-Beam Track with Fascia, 6'

Topline Grant 7007 Track For Sliding Bypassing Doors

Topline Grant 7007 double I-beam track is a 6 foot sliding door track with fascia designed for bypassing doors 1 3/4 inch thick, so it guides two doors past each other on a stable overhead rail for clean, parallel travel. The double I-beam design creates two running channels, which supports a bypass layout where each door has its own path, keeping panels aligned during operation. The fascia spans 2 3/8 inches in depth, so it covers the track front and helps create a finished look across the opening. Overall track dimensions of 3 11/32 inches wide by 15/16 inch high establish a compact profile, which fits many overhead header conditions without demanding extra build-out. Produced by Hettich America Corporation under part number 50556, this track integrates into Topline Grant sliding door hardware systems where a consistent, known profile and size are important for planning clearances.

Key Track Details For Sliding Door Projects

• The 6 foot length gives a continuous run for many standard door openings, so installers can span the width without splicing separate sections, reducing layout time and potential alignment issues at joints.
• The double I-beam configuration forms two rigid channels, so each bypassing door rides on its own lane, which helps prevent door interference and keeps travel predictable across the full opening.
• Mounting holes located approximately every 11 inches on center provide regular fastening points, so the load transfers evenly into the structure and installers have a clear pattern to follow along the header.
• The fascia measures 2 3/8 inches deep, so it covers the front of the track and helps create a uniform face, which is useful when aligning with surrounding trim or casework reveals.
• The 3 11/32 inch width and 15/16 inch height define a low overall profile, so the track occupies a compact space above the doors and simplifies planning for valances or ceiling transitions.
• Material thickness of 0.085 inch in extruded aluminum creates a solid yet manageable section, so the track provides structural support while staying light enough to handle during overhead placement.
• An anodized finish on the aluminum track and fascia stabilizes the surface, so the metal resists surface wear and maintains a consistent appearance along the visible edge over time.
• Pre-drilled holes along the track remove layout measurements for each fastener, so installers can work directly to the pattern and move efficiently down the length during overhead fastening.

Mounting Pattern And Track Profile For Fit

The 3 11/32 inch wide by 15/16 inch high profile defines how this double I-beam track nests into a header space, so carpenters can size framing or trim knowing the height impact above the bypassing doors. The fascia depth of 2 3/8 inches extends down from the track front, which lets the face align with nearby casings or panels to keep sightlines straight. Mounting holes positioned roughly every 11 inches on center provide a repeating fastening grid, so installers can anchor the track into framing members while maintaining a consistent pattern along the span. This spacing means the load from 1 3/4 inch thick bypassing doors distributes through multiple points, which supports smooth travel by helping the track remain straight and supported across the full 6 foot run.

Using This Double Track In Door Layouts

Where This Double I-Beam Track Performs Best

This double I-beam sliding door track is built for bypassing doors 1 3/4 inch thick, so it suits applications where two substantial door panels need to cross in front of each other on a shared opening. The 6 foot length works for many closet, room divider, or cabinet-style spans, giving enough run to carry both doors without joints along the line. The 3 11/32 inch width sets a clear footprint on the header, so designers can coordinate framing and finish materials around a known track dimension. With a fascia measuring 2 3/8 inches deep, the assembly covers the working track from the front, which supports jobs where a cleaner front edge is preferred over exposed hardware. Because the track height is 15/16 inch, the vertical space taken above the door panel is defined, which helps plan top clearances and any surrounding trim build-up around the opening.

Why These Track Details Support Repeatable Results

The pre-drilled holes every 11 inches on center give a repeatable fastening pattern, so each install follows the same spacing and helps maintain straightness over the entire 6 foot span for reliable bypass movement. The extruded aluminum body at 0.085 inch thickness keeps the track stiff along its length, which supports smooth rolling action because the channels stay true under normal sliding loads. An anodized aluminum finish stabilizes the surface, so the visible fascia and track edge keep a consistent appearance that aligns with professional millwork or door packages. The defined channels of the double I-beam section separate the two bypassing doors, which reduces contact between panels and supports long-term, predictable operation. Manufactured by Hettich America Corporation as part number 50556, the track gives shops and installers a known reference when ordering or repeating a hardware layout, which simplifies future service or matching on repeat projects.

Common Questions About Topline Grant 7007 Track

Selecting This Track For Bypassing Door Runs

This Topline Grant 7007 double I-beam track with fascia brings a defined 6 foot length, door thickness rating of 1 3/4 inches, and a 3 11/32 inch by 15/16 inch profile, so it fits well into planned bypass door layouts. With extruded aluminum construction at 0.085 inch thickness and an anodized finish, it provides a stable, consistent surface suited to visible overhead runs. When a project calls for double-channel sliding door hardware from Hettich America Corporation, using part number 50556 aligns the track dimensions, fascia coverage, and mounting pattern to the bypassing door design.