TopLine Grant double profile track defines this 5 foot sliding door component as a dedicated solution for by-passing doors, so it is designed around doors that need to pass in front of each other on parallel paths. The double I-beam track configuration establishes two running profiles, which organizes each door on its own path so movement stays controlled and separated during daily use. Integrated fascia on the track provides a finished front face, so the working hardware is visually screened once the track is mounted in a sliding door assembly. The 5 foot length focuses this track on openings that match that span, helping installers plan straight cuts and layout around a known dimension. As a sliding door hardware part from Hettich America Corporation, the track aligns with a manufacturered system approach for by-passing door projects.
The 5 foot double profile track length gives installers a predictable starting point for aligning by-passing doors across an opening, so track positioning and end clearances can be planned around that measure. The double I-beam configuration sets two distinct running profiles into one piece, so both doors relate back to the same reference track and stay aligned relative to each other over the full run. The fascia incorporated on the track establishes a defined front edge, so installers can align that face with cabinetry or wall lines to control the visible transition between structure and sliding hardware. As a sliding door hardware component, this track sits in the upper guiding role of a system, so its straight layout directly affects how smoothly by-passing doors operate along the opening.
This sliding door hardware component is intended for by-passing doors, so it fits applications where two doors need to share one opening while traveling past each other. The double I-beam track format provides two separate profiles within a single length, so each door runs on its own guided line above the opening. With a 5 foot span, the track aligns naturally with smaller closets, cabinet runs, or similar openings sized around that length, where a single piece can manage the overhead guidance. The fascia running along the track offers a finished edge, so this part suits visible installations where the front of the hardware will be seen as part of the room or cabinet face.
The 5 foot TopLine Grant double profile track length gives a defined maximum opening width from one piece, so door sizing and overlap for by-passing operation can be coordinated around that dimension for consistent coverage. The double I-beam structure within the track separates the two door paths, so interference between by-passing doors is controlled by the fixed geometry of the profiles. The fascia integrated along the track establishes a uniform visible band, so the line between sliding hardware and adjacent materials stays straight and predictable across the entire run. As a Hettich America Corporation component identified under manufacturer part number 50555, the track provides a specific reference for repeat projects, so installers can specify the same sliding door hardware layout when duplicating a successful by-passing door configuration.
The TopLine Grant double profile track is described for by-passing doors, so it is intended for sliding door setups where one door passes in front of another within a shared opening.
The double I-beam track design creates two running profiles, so each by-passing door moves on its own guided path, which organizes motion inside the opening.
The Hettich sliding door track 50555 is 5 feet long, so it suits openings around that span or applications where installers plan to cut the track to a shorter length.
The fascia is integrated with the track, so it forms a finished front face that conceals the working profiles, helping the sliding door assembly present a cleaner look.
This 5 foot double track for doors is identified as a TopLine Grant double profile track, so it belongs to the TopLine Grant sliding door hardware product line.
This sliding door hardware track is from Hettich America Corporation, so it originates from a manufacturer focused on builders hardware and sliding door hardware components.
This TopLine Grant double profile track with fascia is specified as a 5 foot sliding door hardware component for by-passing doors, so it brings a defined length, dual running profiles, and a finished front edge to overhead guidance. The double I-beam track structure organizes two door paths in one piece, while the fascia helps the visible portion of the hardware align with surrounding cabinetry or walls. For projects that call for a named sliding door hardware solution from Hettich America Corporation, this manufacturer part number 50555 track offers a clear, repeatable choice.
Sold In: 1 Each