Topline Grant all-inclusive set 6 ft is a Hettich America Corporation sliding door hardware set designed for a single-door application in standard design. The set is part of the Topline Grant range of sliding door hardware, so it gives installers a defined solution when a 6 ft track length and one moving panel are required. As a builders hardware product within sliding door hardware, it is suited to projects where a straight, overhead-running system is preferred over hinged doors, helping streamline layouts in tight or high-traffic areas.
The set is identified by manufacturer part number 9200614, which ties directly to the 6 ft configuration and standard design specification. This clear identification supports accurate ordering and repeat use on jobs where multiple openings need the same sliding action and appearance.
The core of the system is its runner profile in aluminium with an anodised finish, giving a smooth, consistent running surface for the door fittings and maintaining appearance across projects that specify visible track hardware.
This sliding door hardware set contains the elements needed for a 1-door application in standard design, so the overall layout is based around a single moving panel running on the 6 ft track. The 6 ft runner profile defines where mounting points for the overhead track line up relative to the door opening, guiding the position of structural supports or header details that carry the system. Because the runner profile is aluminium and anodised, it provides a consistent channel for the set of fittings to travel along, which supports dependable door motion across the full length.
The separate set of fittings works with the runner profile, so installers can align hanger positions and stops with the track geometry during installation. This pairing of track and fittings within one defined set simplifies repeated setups in similar openings.
The Hettich Topline Grant all-inclusive set, 6 ft, fits projects calling for sliding door hardware in a standard design where only one door panel moves on a straight track. As a builders hardware product classified as sliding door hardware, it is suited to interior openings or built-in applications that benefit from a linear overhead runner rather than side hinges, such as wide closet fronts or room transitions within that span. The 6 ft runner profile allows layouts that fall within this track length, so framing and cabinet or partition dimensions can be chosen to work within that span without resizing the system itself.
Because the set is defined as an all-inclusive set for a 1-door application, it lets project planners specify a single part number, 9200614, whenever this exact sliding configuration is needed on repeated openings of similar width. This keeps the hardware choice consistent across multiple rooms or units and supports uniform door movement and appearance wherever the same 6 ft sliding solution is applied.
The all-inclusive set can be upgraded by Silent System, wall mounting, fascia, and end caps, so the base sliding door hardware can be adapted to different project requirements while keeping the same 6 ft runner profile and fittings relationship. Having a Silent System as an upgrade option allows the same core track and fittings setup to be paired with a soft-running enhancement when quieter or more controlled door motion is desirable on particular openings.
The wall mounting upgrade option means this sliding door hardware can be configured for mounting on a wall rather than relying solely on other structures, giving designers additional freedom to align the track with finished surfaces while retaining the 6 ft span. Fascia and end cap upgrade options let the visible parts of the runner profile be visually covered or terminated, which helps coordinate the sliding system with surrounding finishes and deliver a more finished appearance while still working off the same aluminium anodised profile.
Together, these upgrade paths use the same underlying 1-door, 6 ft standard design configuration, supporting repeatable installation geometry while allowing variation in how the system is presented or refined on different projects.
The Topline Grant all-inclusive set, 6 ft, is designed for a 1-door application in standard design, so it suits single sliding panels running on one overhead track.
The 6 ft description refers to the runner profile length, so door and opening layouts are based around a track span of approximately six feet for the sliding movement.
The runner profile is aluminium and anodised, providing a lightweight track with a treated surface that supports smooth travel of the sliding door fittings.
The set of fittings is designed to run within the aluminium anodised runner profile, creating a coordinated sliding system where hangers and guides follow the defined track.
The all-inclusive set can be upgraded by Silent System, wall mounting, fascia, and end caps, so the same core setup can be refined for sound, mounting style, or appearance.
Hettich part number 9200614 identifies the Topline Grant all-inclusive 6 ft set for a 1-door application in standard design, helping standardize this configuration across projects.
The Topline Grant all-inclusive set, 6 ft, from Hettich America Corporation provides a defined sliding door hardware solution for a 1-door application in standard design, built around an aluminium anodised runner profile and coordinated fittings. The 6 ft track length and single-panel focus give planners clear parameters for door width and opening design, while the ability to upgrade with Silent System, wall mounting, fascia, and end caps allows the same base system to adapt to different aesthetic and performance goals. For projects needing a consistent, repeatable sliding door configuration tied to part number 9200614, this set offers a straightforward way to align hardware choice with layout and finish requirements.
Sold In: 1 Set