
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
HD single track 6ft anodized describes an aluminium track from Hettich America Corporation designed for sliding door hardware, so it gives a defined running surface for door components in heavier-duty door setups. The aluminium construction means the track is light to handle during layout while still providing a rigid guide profile for consistent sliding motion over the full 6 foot length. The anodised finish creates a hardened surface layer on the aluminium, which helps the track resist surface wear and marking in regular door operation. Because this track sits in the builders hardware and sliding door hardware class, it is suited to projects where you are laying out straight, guided travel for sliding doors rather than hinged movement. Using a single continuous track section at 6 feet helps maintain alignment across the opening, which supports smooth running when matched with suitable sliding door components.
This aluminium, anodised drill holes track is supplied with holes already formed, so you position the 6 foot length and use those holes as your fixing pattern instead of creating a new layout. By following the recommended 4.8 x 32 mm oval head screws guidance, you match both the diameter and head form to the pre-drilled holes, which helps the screw heads seat correctly against the track. Using an aluminium profile keeps the track weight manageable when working alone or overhead, making it easier to hold in place while you drive fasteners through the existing holes. Because this component is part of sliding door hardware, the installed track then provides the guiding base for compatible sliding door components, so accurate fastening along the length directly affects how smoothly the door will travel.
This Hettich sliding door track sits within builders hardware and sliding door hardware, so it suits installations where you need a defined upper or lower guiding line for a door leaf. The 6 foot length makes it appropriate for wider cabinet runs or passage openings that fall within that span, allowing a single piece to carry the sliding path. Because the track is anodised aluminium, it works in interior woodworking environments where a metal guide is required but lower weight helps during fitting and handling. The existing drill holes along the track align well with situations where repeatable spacing is useful, such as lining up multiple fixing points into studs, blocking, or a rigid substrate.
The aluminium construction of the HD single track means you can trim or adjust the profile using typical metalworking methods if your opening is shorter than 6 feet, giving flexibility while still starting from a standard length. The anodised surface gives the track a stable, hard outer layer, which helps it maintain a consistent contact surface where rollers, guides, or sliders interact with it over time. With drill holes already provided for ease of attachment, each hole location dictates a fixing point, which supports even load distribution along the track so the sliding door hardware works without localized sagging. Referencing the recommended 4.8 x 32 mm oval head screws ensures the shank size and head profile relate properly to the holes in the aluminium, which supports clamping without distorting the track. Because this part carries the manufacturer part number 9201446, it can be matched precisely when a particular Hettich system specification calls out that track, reducing the chance of mixing profiles or lengths on multi-opening projects.
The Hettich 9201446 track is a sliding door hardware component, so it serves as the guiding track within builders hardware applications where doors are designed to slide rather than hinge.
This aluminium, anodised track is 6 feet long, providing a single continuous guiding length that supports straight travel for sliding door components across the opening.
The track has drill holes already provided for ease of attachment, so you can fasten through those points directly, speeding installation and keeping fixing positions consistent along the length.
The web description recommends 4.8 x 32 mm oval head screws, which aligns screw diameter and head style to the pre-formed holes for secure fastening to the mounting surface.
The track is made from aluminium with an anodised finish, giving a light but rigid profile and a hardened surface where sliding door components contact the track.
This HD single track, anodized, 6' is manufactured by Hettich America Corporation, aligning it with the Hettich sliding door hardware product class.
The HD single track, anodized, 6' from Hettich America Corporation combines an aluminium body with an anodised finish, giving a rigid guiding path for sliding door hardware while staying manageable to position on site. With drill holes already provided for attachment, the track allows a direct fastening workflow that follows the existing pattern. The recommended 4.8 x 32 mm oval head screws detail helps align your fastener choice with the track design so it can clamp firmly to the supporting structure. For builders hardware projects using sliding door hardware, this 6 foot aluminium, anodised track gives a defined, continuous guide that supports smooth door travel when paired with appropriate sliding components.
Sold In: 1 Each