
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2 inch wide 28 inch table leg describes a single Rockwell table leg that stands 28 inches high and uses a 2 inch wide square profile, giving installers a defined work surface height that matches standard table applications. The brushed steel construction provides a clean metal finish that suits work surfaces and tables where a straightforward steel appearance fits project needs. This leg is part of the Rockwell line from Peter Meier, Inc., so it ties into a known table leg family for consistent look across multiple work surfaces. As a single table leg, it supports layouts where legs are placed precisely under corners or frame points, which matters when spacing support under custom tops. Being in the work surface and tables category defines it for table-height projects where a clear 28 inch starting height is required.
The 4 9/16 inch (116mm) square mounting plate at the top of the Rockwell single table leg creates a defined interface to the underside of the work surface, which helps installers understand how much flat material is needed for secure attachment. With the leg standing 28 inches high and using a 1 1/8 inch adjustable foot, the assembly offers a table-height range that can be tuned by raising or lowering the foot, which matters when matching existing surfaces or aligning multiple tables in a run. The square plate shape gives predictable edges for measuring setbacks from the table perimeter, helping keep legs consistently positioned along all sides of a top.
This Rockwell single table leg from Peter Meier, Inc. sits in the work surface and tables category, so it is suited to table and similar work-surface builds where a controlled height matters. The 28 inch high dimension targets table-height installations, allowing installers to plan ergonomics and clearance below the top around that figure. A 2 inch wide square profile gives this metal leg a compact footprint, which benefits layouts where legs sit near corners without consuming extra under-table space. The brushed steel construction provides a metal finish that visually fits typical work surface environments, so multiple legs can line up under counters or tables with the same appearance. The 4 9/16 inch (116mm) square mounting plate further defines how this leg connects to the underside of a top, giving fabricators a known plate size when designing mounting locations into their workpieces. Because it is sold as a single table leg, layouts can be planned with exactly the number of legs needed at each support point across a work surface or table grouping.
The 1 1/8 inch adjustable foot at the base of the Rockwell single table leg gives a measurable adjustment range under the 28 inch body, which allows the installed height to be tuned within that span. That adjustability helps when a run of tables needs to meet a consistent surface elevation despite small changes in floor level from one position to the next. By starting from a 28 inch leg height and adding the adjustable foot, installers can work within a known overall range rather than guessing at leg length. The 4 9/16 inch (116mm) square mounting plate concentrates attachment within a defined area, which helps maintain repeatable positioning from one leg to another during fabrication. The square format also supports consistent orientation at each corner of a rectangular top, so legs align in the same way around the perimeter. Together, the fixed leg height, adjustable foot, and square plate give trade professionals a predictable set of dimensions for planning cut lists, drilling patterns, and leg spacing on work surfaces and tables.
The Rockwell single table leg is 2 inches wide and 28 inches high, giving a compact square profile and a standard table-height starting point for planning work surfaces and tables.
The leg has a 1 1/8 inch adjustable foot, so the installed height can be fine-tuned within that range to align table tops over uneven floors or across adjoining surfaces.
The 4 9/16 inch (116mm) square mounting plate defines a fixed attachment area on the underside of the top, helping installers plan fastener locations and setback distances consistently.
The Peter Meier, Inc. Rockwell leg uses a brushed steel finish, giving work surfaces and tables a straightforward metal look suitable for exposed leg applications.
This product is classified under work surface and tables in the table legs product class, so it is oriented toward table-height support applications.
Manufacturer part number 850-7S-ST identifies this specific Rockwell single table leg configuration, helping buyers match the 2 inch wide, 28 inch high brushed steel version in future projects.
Use the 2 inch wide 28 inch table leg from the Rockwell line when a single, brushed steel leg with a defined 28 inch height, 1 1/8 inch adjustable foot, and 4 9/16 inch square mounting plate fits your work surface or table layout. The known dimensions and finish from Peter Meier, Inc. give you a repeatable leg choice for new builds or expansions that follow the same Rockwell specification.
Sold In: 1 Each