2" Wide x 40-3/4" High Square Rockwell Table Leg Set, Stainless Steel, 4/Set

2 Inch Wide Rockwell Table Leg Set For Stable Support

2 inch wide 40-3/4 inch high Rockwell table leg set defines this Peter Meier, Inc. solution for supporting work surfaces and tables, so installers can match a known size when laying out frames and tops. The legs are part of the Rockwell line, which gives a consistent reference when coordinating with existing jobs or drawings. Each leg is stainless steel, which resists common shop and project environments and maintains a uniform appearance over time. The set belongs to the table legs product class in the work surface and tables category, tying it directly to fixed worktops rather than light-duty furniture. The height of 40-3/4 inches positions the legs for taller surface layouts where consistent elevation is important across multiple supports. Because the legs share the same width dimension, they present a square profile that simplifies aligning edges to cabinet or frame lines.

Key Rockwell Stainless Steel Table Leg Details

• The table leg set height of 40-3/4 inches establishes a fixed reference for taller work surfaces, which helps align tops and adjacent structures to a known elevation across an installation.
• The 2 inch wide square shape defines the footprint of each leg, so installers can plan clearances and edge reveals around the support points with predictable geometry.
• Stainless steel construction provides a solid, uniform material for the legs, which supports consistent appearance and performance in typical work surface and table environments.
• The Rockwell table leg set is supplied in a set of 4 legs, which matches common four-corner support layouts on rectangular work surfaces and tables.
• The hardware is identified by manufacturer part number 850-40-SS, so repeat orders and specification on drawings can rely on an exact, traceable product reference.
• The table legs are part of the Work Surface & Tables category under table legs, clarifying that they are intended as structural supports for fixed tops rather than decorative elements.

Mounting Plate And Adjustable Foot For Practical Fit

The Rockwell leg design uses a 4 9/16 inch, or 116mm, square mounting plate, which creates a broad interface between the leg and the underside of the work surface for stable load transfer. This square plate layout gives installers a clear pattern for placing fasteners near the corners of the plate, helping distribute forces into the top. Each leg has a 1 1/8 inch adjustable foot, which adds a small but useful range to fine-tune height when floors are uneven. That adjustment capability lets installers align multiple legs so the work surface contacts all supports evenly, reducing rocking and stress on fasteners. Because both the mounting plate size and the adjustable foot travel are defined, planning pilot hole locations and final working height can follow predictable measurements.

Using The Rockwell Table Leg Set In Workspaces

Where This Stainless Steel Table Leg Set Fits

The Peter Meier, Inc. Rockwell table leg set is identified in the Work Surface & Tables category with a table legs product class, which positions it for use under fixed worktops, counters, and similar surfaces. The 40-3/4 inch height suits projects that call for taller stand-up surfaces or elevated tables, where consistent leg length is critical to avoid twist in the top. The 2 inch wide square profile defines a compact yet substantial support, so it can sit near cabinet sides or under frame rails without taking up excessive footprint. With its stainless steel construction, the set matches applications where a clean metal appearance is desired along with a material that maintains its look in normal shop, residential, or commercial interiors. Because the mounting plate is 4 9/16 inches square, it fits comfortably on typical underside framing or solid tops while still leaving room for edge details or other hardware.

Details That Support Level, Repeatable Installations

The 1 1/8 inch adjustable foot built into each Rockwell table leg gives the installer a way to dial in final surface level without changing the fixed leg height, which is valuable when tying into existing cabinets or walls. That adjustability also helps when multiple legs are used under one work surface, allowing each support to be set so the load is shared rather than concentrated. The 4 9/16 inch (116mm) square mounting plate offers a stable base for fasteners because the distance between plate edges spreads out the connection area on the underside of the top. With manufacturer part number 850-40-SS clearly tied to this configuration, drawings and order forms can specify the exact leg height, width, and finish for repeat projects. The fact that the product is described specifically as a Rockwell leg set links it to a defined style and geometry, simplifying coordination with other Rockwell components where the same visual and dimensional language is important.

Common Questions About Rockwell Table Leg Set Fit

Select This Rockwell Leg Set For Defined Height Support

The 2 inch wide x 40-3/4 inch high square Rockwell table leg set in stainless steel offers a clearly defined height, width, and mounting plate size for planned work surface layouts. With its 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, the set provides stable contact under the top and controlled leveling at the floor. The Rockwell identification and 850-40-SS part number tie the legs to a repeatable specification, simplifying reorders and coordination across projects. For work surfaces built around a tall, consistent support structure, this Rockwell table leg set from Wurth Baer Supply delivers a documented configuration that installers can match to drawings and field conditions.