2-3/8" Wide x 28" High Square Rockwell Single Table Leg, Brushed Steel

28 Inch Rockwell Table Leg For Work Surfaces

28 inch Rockwell table leg from Peter Meier, Inc. provides a defined 28 inch high support point that suits standard work surfaces where a consistent working height keeps cabinetry and shop layouts aligned. The 2-3/8 inch wide square profile establishes a compact footprint that supports the top while keeping corners clear for knees and storage. The brushed steel finish creates a uniform metal surface that pairs with many laminate and wood tops in workrooms, offices, and commercial shop spaces. This single table leg format lets you frame islands, counters, or desk runs one support at a time, matching existing framing where needed. Being part of the Rockwell line gives a consistent visual look when multiple legs are used on the same project so long runs of work surface read as one system.

Key Rockwell Single Table Leg Details

• The 2.36 inch square dimension described in the product data defines the leg face size, which helps plan edge setbacks and overhangs on work surfaces so tops land flush without crowding the perimeter.
• The 28 inch height positions the top at a standard table level, which simplifies matching this support to common base cabinet arrangements where seated work or assembly benches share the same plane.
• The brushed steel finish establishes a consistent metallic appearance, which helps blend this leg into metal-framed interiors and commercial fixtures where exposed structure contributes to the overall design.
• The single leg configuration described in the web information lets you use one support where a corner or end needs structure, which is helpful when tying into walls or existing casework.
• The Rockwell identification in the description connects this part to the broader Rockwell family, which helps maintain visual continuity across mixed-height work surfaces in the same project.

Mounting Plate And Adjustable Foot Use

The 4 9/16 inch square mounting plate called out in the web description gives a clearly defined bearing area under the top, which spreads load over more surface so fasteners seat firmly and the leg feels solid in service. The square plate shape creates consistent edge references at all four sides, which simplifies layout when you want multiple legs aligned along a straight run or set in from the front edge by the same distance. The 1 1/8 inch adjustable foot referenced in the description allows the effective height to be fine-tuned within that adjustment range, which helps level a run of tops when floors are uneven or when matching an existing surface that is slightly higher or lower than nominal table height.

Rockwell Leg Application And Performance Details

Where This Square Rockwell Leg Works Best

This 2-3/8 inch wide Rockwell single table leg fits work surface and table applications where a 28 inch nominal height is called for, such as shop benches, office tables, and light duty assembly areas that need a consistent seated working plane. The square 2.36 inch profile described in the SAP data suits layouts where a crisp, geometric leg detail complements straight-edged laminates and squared cabinet ends. The 4 9/16 inch square mounting plate noted in the web description supports use at corners and intermediate points on long tops, because the broader plate area engages more of the underside for stability along the full depth. The association with Work Surface & Tables in the category data connects this leg to benches, counters, and similar structures, so it fits into projects where work surfaces transition from wall-supported sections to free-standing ends.

Details That Support Repeatable Level Results

The 1 1/8 inch adjustable foot listed in the product data creates a practical adjustment window, because that movement lets you address typical floor variations without changing the leg or modifying the top. The square mounting plate dimension of 4 9/16 inches provides fixed reference edges front-to-back and side-to-side, which helps installers build simple jigs or use straightedges so each leg location repeats accurately along a bank of tables. The 28 inch height works together with the adjustable foot, since the plate-to-floor distance can be fine-tuned within that 1 1/8 inch range while still centering around a standard table height, helping runs of tops meet existing casework cleanly. The brushed steel finish on the Rockwell leg gives a uniform surface that tends to mask minor handling marks during normal installation, which supports consistent appearance when multiple legs line a visible aisle or open office layout.

Common Questions About This Rockwell Table Leg

Select This Rockwell Leg For Standard Height Tops

This 2-3/8 inch wide x 28 inch high Rockwell single table leg in brushed steel gives you a defined support height, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot that together support level, aligned work surfaces. When a project calls for a square-profile leg that fits the Rockwell family and matches standard table height, this part number 860-7S-ST from Peter Meier, Inc. provides a focused option for building or extending work surfaces through Wurth Baer Supply.