2-3/8" Wide x 34-1/2" High Square Rockwell Single Table Leg, Stainless Steel
Description
Rockwell Single Table Leg For Work Surfaces
Rockwell single table leg gives you a dedicated support for work surfaces and tables using a square stainless steel leg in jobs that call for a clean, consistent support point. This 2-3/8 inch wide x 34-1/2 inch high square Rockwell single table leg creates a fixed-height support suited to standard table and work surface layouts where a tall, straight leg is needed. The stainless steel construction provides a solid metal support that resists everyday shop and project use in woodworking and workroom environments. The leg design concentrates support at one point, which is useful when you are building tables or work surfaces that rely on individual legs rather than panel bases. As a single table leg, it lets you plan layouts where you position legs exactly where they are needed under tops, islands, or work counters.
Key Rockwell Single Table Leg Working Details
- The 2-3/8 inch width on this square leg creates a compact footprint at the floor while still presenting a substantial post, which helps when fitting legs close to edges or corners without consuming excess space.
- The 34-1/2 inch height sets the leg for use in taller work surfaces, counters, or upper-height tables where a longer support is required, so you can match the leg to elevated work areas.
- The stainless steel material forms a rigid, metallic support element that stands up to routine shop traffic and contact, which matters when legs are exposed under work surfaces or tables.
- The square profile of the leg creates flat faces that align visually with straight cabinet or panel edges, which can simplify layout when you want legs that visually track with square components.
- The Peter Meier, Inc. branding and Rockwell identification tie this leg to a defined product line, which helps keep parts consistent when repeating a table design across multiple installations.
Mounting Height And Foot Adjustment Details
The 34-1/2 inch overall leg height positions this Rockwell component for higher work surfaces and tables, so you can build elevated projects without fabricating custom leg lengths. The 1 1/8 inch adjustable foot gives you vertical adjustment at the floor, which helps take up small variations where the floor is uneven while keeping the top level. The adjustable foot also allows fine-tuning of height when you want to align adjoining tops or connect multiple work surfaces. Together, the fixed leg length and the adjustable foot let you set up repeatable heights across several units while still accommodating on-site floor conditions.
Square Mounting And Height Use In Real Projects
Where This Square Stainless Steel Leg Fits
This 2-3/8 inch wide x 34-1/2 inch high square Rockwell single table leg fits work surfaces and tables that are built to stand on individual legs rather than continuous bases, giving you an upright support option for open designs. The 4 9/16 inch (116mm) square mounting plate at the top spreads the load across a larger area on the underside of the top, which supports the work surface connection when you are working with heavier tops or wider spans. The square mounting plate geometry matches the square leg profile, which helps you orient the leg uniformly at each corner or support point. With table, counter, and bar heights available within the broader offering, this specific 34-1/2 inch leg can be selected where a taller station is part of a coordinated height range on a project.
Why The Adjustable Foot And Plate Matter
The 1 1/8 inch adjustable foot on the Rockwell single table leg provides a controlled range of height adjustment at the bottom of the leg, which lets you dial in final height once the top is set in place. That adjustment capability allows you to bring multiple legs into full contact with the floor, helping prevent rocking when work surfaces are loaded. The 4 9/16 inch square mounting plate gives you a consistent interface location for each leg, which simplifies layout and drilling patterns when building several identical tables. The defined plate size also helps when you are working near edges or cutouts, because you can plan clearances knowing the mounting footprint. Combining the adjustable foot with the fixed plate size supports repeatable fabrication in the shop and controlled height tuning during installation.
Common Questions About Rockwell Single Table Leg
What are the main dimensions of this Rockwell single table leg?
The Rockwell single table leg is 2-3/8 inches wide and 34-1/2 inches high, so it serves as a tall, square post suited to higher work surfaces and tables that rely on individual legs.
How does the 1 1/8 inch adjustable foot help in use?
The 1 1/8 inch adjustable foot on the leg provides vertical adjustment at the floor, allowing small height changes that help level the work surface on uneven floors.
What is the purpose of the 4 9/16 inch square mounting plate?
The 4 9/16 inch (116mm) square mounting plate spreads the load from the leg into the underside of the top, giving a stable attachment area when supporting work surfaces or tables.
What material is this Peter Meier Rockwell leg made from?
The Peter Meier Rockwell leg is stainless steel, providing a rigid metallic support that stands up to regular contact in woodworking and work surface environments.
How does this leg work with table, counter, and bar heights?
This Rockwell leg is part of a group where table, counter, and bar heights are available, so the 34-1/2 inch option can be chosen to match taller work or counter-height layouts.
Why choose a square 2-3/8 inch profile for table support?
The square 2-3/8 inch profile gives a compact yet substantial post with flat faces, which aligns visually with straight cabinet or panel edges in table and work surface builds.
Selecting This Leg For Your Next Work Surface
This 2-3/8 inch wide x 34-1/2 inch high Rockwell single table leg in stainless steel combines a defined leg height, an adjustable 1 1/8 inch foot, and a 4 9/16 inch square mounting plate to support elevated tables and work surfaces. When a project calls for individual stainless steel legs with consistent geometry tied to the Peter Meier, Inc. Rockwell line, this leg offers a square profile and controlled adjustment that suit repeatable fabrication and on-site leveling. Use these verified details to match the leg to your planned top height and mounting layout, then apply it wherever a square stainless support is required.