Description
3 Inch Wide Rockwell Table Leg Set For Stable Work Surfaces
3 inch wide 34-1/2 inch Rockwell table leg set defines this brushed steel leg solution for building or supporting tables, counters, or bar-height work surfaces. The 34-1/2 inch height works as a base dimension that suits standard table or counter builds when a structural, consistent leg height is needed. The 3 inch square profile creates a substantial footprint that helps support heavier tops in woodworking and shop environments. A 1 1/8 inch adjustable foot on each leg provides height tuning at the floor, which helps compensate when floors are uneven. That adjustment range supports tight installs where tops must align with adjacent counters or fixtures. A 4 9/16 inch square mounting plate at the top of each leg creates a broad interface to the underside of the work surface, which spreads load and supports a more rigid connection in use.
Rockwell Leg Features That Support Shop Builds
- The 3 inch wide square leg profile presents a broad stance that helps carry work surface loads and supports stable tables in cabinet shops or project spaces where racking resistance is important.
- The 34-1/2 inch leg height sets a consistent starting point for table or counter elevations, which supports repeatable builds across multiple units using the same Rockwell layout.
- The 1 1/8 inch adjustable foot on each leg allows small height changes at floor level, which helps align tops with nearby surfaces and correct minor floor variation without cutting the leg.
- The 4 9/16 inch (116mm) square mounting plate creates a large contact patch with the underside of the top, which distributes fastener load and supports a solid connection under working loads.
- The brushed steel finish on the Rockwell legs provides a metal surface suited for exposed installations where the leg is visible, coordinating with other brushed steel elements in shops or finished spaces.
Mounting And Height Adjustment Details For Rockwell Legs
The Rockwell leg design centers on the 4 9/16 inch square mounting plate, which provides a defined area for fastening to the underside of a work surface. This clear plate dimension helps layout fastening patterns when planning tops in the shop. The 34-1/2 inch nominal height, combined with the 1 1/8 inch adjustable foot, offers a practical window for dialing in final working height after the top is installed. That adjustable foot focuses the change at the floor, so the main leg body remains a fixed reference dimension, useful when cutting or ordering multiple tops to the same design height. Across a run of tables or counters, this combination supports consistent finished heights while still allowing correction for variations in floor flatness.
Using Rockwell Square Legs In Work And Counter Runs
Where Rockwell 3 Inch Square Legs Are Applied
The 3 inch wide x 34-1/2 inch high square Rockwell table leg set is positioned for work surface and table use where a square, metal support is preferred. The leg set sits within the Work Surface & Tables category, connecting it directly to bench, table, and counter build projects. The table, counter, and bar heights referenced in the description show that Rockwell legs are used across different working elevations, with this brushed steel version aligning with the 34-1/2 inch range. In a run of counters or shop tables, these legs act as the primary vertical support under tops, allowing fabricators to use the same leg geometry at multiple stations. The square profile also presents clean lines suited to modern workspaces or commercial interiors that use exposed metal supports.
The brushed steel finish defines the visual and material character of this leg set in those applications. That finish places the legs comfortably in environments where metal hardware and fixtures are visible, tying in with brushed steel pulls, frames, or equipment. Because the legs are purpose-built as table legs within the Work Surface & Tables class, they serve as structural members rather than decorative trim, which matters in shops where loads and day-to-day use are central concerns. Across these use cases, the 3 inch square format and specified height provide predictable geometry for layout, cutting, and design.
Why Rockwell Details Support Repeatable Install Results
The defined 34-1/2 inch leg height serves as a reference dimension that simplifies planning multiple tables or counters around the same working level. When installers base their drawings on this fixed leg height, they can standardize top thickness and finished elevations across a project. The 1 1/8 inch adjustable foot then provides the fine tuning needed during final setup, allowing each leg to respond to local floor conditions without altering the core design dimensions. This separation between a fixed leg body and an adjustable foot supports repeatable builds that still adapt on site.
The 4 9/16 inch square mounting plate is another dimension that directly supports repeatable results. With a set plate size, fabricators can pre-plan screw patterns and edge setbacks on tops, drilling or routing in the shop with confidence that the plate footprint will match. That consistency helps reduce layout rework during installation and supports cleaner underside detailing on high-visibility projects. The square 3 inch leg profile also simplifies orientation because each face presents the same dimension, making layout straightforward when aligning legs along edges or within frames. All of these defined Rockwell dimensions work together to support predictable, repeatable installation outcomes on table, counter, and bar-height projects.
Key Questions About Rockwell Brushed Steel Table Legs
What is the height of the Rockwell table leg set?
The Rockwell leg set height is 34-1/2 inches, which establishes the primary working level for tables or counters and simplifies designing tops to reach a consistent finished height.
How wide are the square Rockwell table legs?
The Rockwell legs are 3 inches square, creating a substantial footprint that helps support heavier work surfaces and offers a clean, square profile for visible installations.
What adjustment range does the Rockwell leg foot provide?
The Rockwell leg foot is adjustable 1 1/8 inches, allowing installers to fine-tune height at floor level so tops align properly even when floor surfaces are slightly uneven.
What is the size of the Rockwell mounting plate?
The Rockwell mounting plate measures 4 9/16 inches square, giving a broad connection area to the underside of the surface and helping distribute loads across multiple fasteners.
What finish is on the Rockwell table leg set?
The Rockwell table leg set has a brushed steel finish, which suits exposed work surfaces or counters where metal legs are visible and need to coordinate with other brushed steel elements.
What is the manufacturer part number for these Rockwell legs?
The manufacturer part number is 876-34-ST, which identifies this specific 3 inch wide, 34-1/2 inch high brushed steel Rockwell leg set for reordering or project documentation.
Choose This Rockwell Leg Set For Structured Work Surfaces
The 3 inch wide x 34-1/2 inch high square Rockwell table leg set in brushed steel offers a defined combination of height, footprint, and adjustment for table, counter, and bar-height builds. With its 4 9/16 inch square mounting plate and 1 1/8 inch adjustable foot, this Peter Meier, Inc. design supports stable, level work surfaces across projects. For work surface and table builds that call for a square metal leg in the Rockwell family, this 876-34-ST set provides the key dimensions and finish needed for consistent, repeatable installations.