3" Wide x 40-3/4" High Square Rockwell Single Table Leg, Brushed Steel

3 Inch Wide 40-3/4 Inch Table Leg For Work Surfaces

3 inch wide 40-3/4 inch table leg defines this Peter Meier, Inc. Rockwell single leg as a straightforward support for work surfaces and tables, giving you a known height to build standard table or counter projects. The 40-3/4 inch high dimension positions tops at a tall working level once you add your surface thickness, which helps when planning standing-height workstations or higher counters. The leg uses a 3 inch wide square profile, so you get a compact footprint that still carries visual weight on modern installations. With a brushed steel finish, the leg presents a neutral metallic look that coordinates with many laminates and wood tones in commercial or shop environments. As a single table leg from the Rockwell line, it fits situations where you are supporting one corner or side of a work surface instead of using a full base.

Rockwell Table Leg Details That Support The Job

• The 3 inch wide square design keeps the leg visually substantial while staying compact at floor contact, which matters when laying out clearance for chairs or equipment around the table perimeter.
• The 40-3/4 inch high dimension sets a predictable structural height, helping you align multiple legs or other supports to keep long work surfaces level and steady across their span.
• The brushed steel finish gives the leg a consistent metallic appearance, which is useful when matching visible components across several tables in the same room or project run.
• The Rockwell single table leg format suits layouts where only one end or section of a work surface needs a vertical support, allowing flexibility when combining legs with cabinets or wall brackets.
• The product sits in the Work Surface & Tables and Table Legs categories, signaling that it is intended for fixed worktops rather than light decorative furniture pieces.

Mounting Plate And Adjustment For Clean Installation

The leg incorporates a 1 1/8 inch adjustable foot, giving you a small but important range to fine-tune final height and compensate for uneven floors, which helps reduce rocking and twist in long tops. An approximately 4 9/16 inch, or 116 mm, square mounting plate ties the leg to the underside of the surface, spreading load over a larger area so stresses are not concentrated at a small point. That square mounting plate shape simplifies layout because its equal sides make it straightforward to position at corners or along edges while keeping the leg aligned with table lines. With the mounting plate designed specifically for this Rockwell leg, the transition from plate to 3 inch square leg remains controlled and predictable in appearance under the top. Together, the adjustable foot and the defined plate size support a repeatable installation process across multiple identical tables.

Using This Rockwell Single Table Leg In Real Projects

Where This 3 Inch Square Metal Table Leg Works

This Rockwell single table leg fits into work surface and table builds where a tall support is needed under one section of the top, such as an open-ended run or a free corner. The 40-3/4 inch height is suited to applications where the finished top is intended to sit relatively high once material thickness is added, creating a standing-height station or elevated surface. Because the leg uses a 3 inch square profile, it occupies limited floor space, which is useful near doorways, traffic paths, or chair locations where extra clearance is valuable. The 4 9/16 inch, or 116 mm, square mounting plate gives you a clear footprint on the underside of the work surface, so you can position the leg consistently on repeated builds or mirrored layouts.

Why These Mounting And Adjustment Details Matter

The 1 1/8 inch adjustable foot allows the 40-3/4 inch high leg to accommodate slight variations in floor level without altering the main structure, helping keep a line of tables visually straight even when the substrate is uneven. That adjustability also supports fine-tuning the interface between this leg and adjacent cabinets or fixed supports, reducing stress where structural elements meet the same top. The 3 inch wide square leg integrates cleanly with the square mounting plate, so loads transfer directly from the top into the vertical support rather than through cantilevered brackets. With the plate dimension specified at 4 9/16 inches, or 116 mm, installers can drill or mark recurring hole patterns on jigs or templates to speed production runs. As a Peter Meier, Inc. Rockwell component identified by part number 876-1S-ST, the leg provides a consistent reference when matching existing installations or reordering for expansions.

Common Questions About The Rockwell Table Leg

Selecting This Leg For Your Next Work Surface

The Peter Meier, Inc. Rockwell 3 inch wide x 40-3/4 inch high single table leg in brushed steel offers a defined height, a 3 inch square profile, and a 4 9/16 inch square mounting plate with a 1 1/8 inch adjustable foot. Together, those details give you predictable support and leveling for tall tables and work surfaces. For projects where a single structural leg must carry a visible corner or open end, this Rockwell leg provides a clear, repeatable solution ready to integrate into your layout.