Description
3 Inch Diameter Rockwell Table Leg Set Use
3 inch diameter Rockwell table leg set defines this Peter Meier, Inc. solution as a stable support for work surfaces and tables where a substantial round leg is needed. The 34-1/2 inch high dimension establishes a tall support option that suits work surface layouts requiring this specific height in the assembly. Brushed steel finish gives the leg set a clean, metallic appearance that aligns well with modern shop, office, or residential projects needing a metal look on exposed supports. The set configuration provides four matching legs from one part number, which simplifies planning when a table or work surface is designed around four-legged support. With an adjustable foot built into each leg, the system supports fine tuning of the installed height, which helps when dealing with floors that are not perfectly level across the span of the table.
Key Rockwell Leg Details For Project Planning
- The table, counter and bar heights available detail establishes that this Rockwell family spans multiple height options, which helps align the 34-1/2 inch leg height to a specific installation tier when coordinating with other work surfaces.
- The 1 1/8 inch adjustable foot provides height adjustability at the bottom of each leg, allowing small corrections in overall table height so the work surface can sit evenly across uneven flooring or slight structural variations.
- The 4 9/16 inch, or 116mm, square mounting plate dimension defines the footprint at the top of each leg, which helps in laying out mounting locations on the underside of the work surface for secure attachment and clear screw pattern planning.
- The manufacturer part number 976-34-ST ties this exact 34-1/2 inch brushed steel configuration to a specific catalog listing, which supports accurate specification, ordering, and repeat use on follow-up projects needing the same leg style.
- The classification under Work Surface & Tables and Table Legs clarifies that this product is intended as structural support for flat surfaces, guiding its use toward benches, tables, and similar applications rather than decorative components.
Rockwell Table Leg Mounting And Adjustment
The 4 9/16 inch (116mm) square mounting plate provides a broad contact area at the top of each Rockwell table leg, which helps distribute load into the underside of the work surface during installation. This defined plate size makes it straightforward to position and align each leg so the layout matches the edge clearances and structural members of the top. The 1 1/8 inch adjustable foot at the base of the leg gives a dedicated adjustment range, so the installed height can be fine tuned after the legs are fastened. This adjustment feature helps align multiple legs to the same working plane, which reduces rocking and supports accurate leveling of the finished table or work surface in real job conditions.
Using Rockwell Brushed Steel Legs In Projects
Where This Rockwell Table Leg Set Fits
The 3 inch diameter x 34-1/2 inch high Rockwell table leg set from Peter Meier, Inc. fits projects where a tall, cylindrical metal leg is appropriate for supporting a work surface or table. The diameter establishes a substantial round profile, which contributes to a solid stance under heavier tops when spaced correctly. At 34-1/2 inches high, each leg defines the primary support height before adjustment, which suits applications that call for a taller surface level within the Rockwell range of table, counter and bar heights. The brushed steel finish ties this leg set to installations that favor exposed metal components, such as workshop benches, utility tables, or contemporary interiors where the support structure is visible. The square mounting plate design supports use on a variety of flat tops by providing a clear interface for attachment wherever the underside construction allows a 4 9/16 inch plate.
Details That Support Consistent Leg Installation
The defined 4 9/16 inch (116mm) square mounting plate on each leg helps installers repeat the same setback and rotation on every corner, which supports consistent spacing and alignment across multiple tables built to the same plan. The 1 1/8 inch adjustable foot gives each leg its own leveling point, so minor floor irregularities can be addressed at the leg base instead of altering the work surface or shimming between the plate and the top. Positioning the adjustment at the foot also keeps the mounting plate height fixed, which simplifies measuring apron clearances and skirt locations during layout. Working with the 976-34-ST part number keeps all of these details consistent each time this leg is specified, which is valuable in environments where multiple benches or tables must share a common height and visual appearance.
Common Questions About Rockwell Table Leg Details
What are the dimensions of each Rockwell table leg?
The Rockwell table leg set provides legs that are 3 inches in diameter and 34-1/2 inches high, which defines both the visual profile and the standing height used in a work surface design.
How does the 1 1/8 inch adjustable foot help during setup?
The 1 1/8 inch adjustable foot allows each leg to be fine tuned in height, which helps level the table or work surface when the floor varies slightly from one corner to another.
What is the purpose of the 4 9/16 inch square mounting plate?
The 4 9/16 inch (116mm) square mounting plate provides a defined interface to the underside of the work surface, distributing load and simplifying layout for screw placement at each leg location.
How does the brushed steel finish affect project appearance?
The brushed steel finish gives the Rockwell table legs a metallic, brushed look, which supports clean, modern, or industrial-style projects where the support structure remains visible.
What does the part number 976-34-ST identify?
The part number 976-34-ST identifies this specific Rockwell leg set configuration, tying together the 34-1/2 inch height and brushed steel finish for accurate selection and reordering.
How is this Rockwell set categorized for use?
This Rockwell leg set is categorized under Work Surface & Tables and Table Legs, indicating its intended role as structural support for tables, benches, and similar flat work surfaces.
Selecting This Rockwell Leg Set For Your Work
The 3 inch diameter x 34-1/2 inch high Rockwell table leg set in brushed steel offers a defined combination of height, diameter, and finish for work surfaces and tables. The 1 1/8 inch adjustable foot and 4 9/16 inch (116mm) square mounting plate supply clear reference points for layout, fastening, and leveling during installation. With the 976-34-ST part number tying these features together, this set presents a consistent option when planning new builds or aligning additional tables to existing Rockwell-supported surfaces.