Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #6 x 1-1/2" Face Frame and Pocket-Hole Screw is a coarse-thread, pan head fastener built for pocket-hole joinery and face frame assembly in softwood, plywood, and other sheet goods. At 1-1/2 inches, it is the standard length for pulling together 3/4-inch stock at a pocket-hole joint, making it a natural fit for building and attaching softwood face frames, assembling cabinet carcasses, and joining furniture panels.
The 1-1/2 inch length is the go-to choice when your pocket-hole joint is pulling two pieces of 3/4-inch stock together face-to-face or edge-to-face. That covers the most common scenarios in face frame construction: joining rails to stiles, attaching a finished face frame to the front of a cabinet box, and assembling furniture panel corners with a pocket jig. The screw threads fully into the second member while the pan head draws the joint closed, leaving a clean, tight seam without requiring clamps to hold position during driving.
The coarse thread is matched to softwood species like pine and poplar, as well as plywood, MDF, and particleboard, where its wider pitch bites into the fiber structure for reliable pull-out resistance. The Type 17 Auger point extends the standard Type 17 flute design with a longer, more aggressive chip-clearing profile that reduces the resistance felt when the screw first enters the material. Together, the point and thread make this screw drive quickly and seat fully without the stalling or splitting that can happen with a standard sharp-point screw in production work.
Cabinet shops running pocket-hole joinery at volume need a screw that loads consistently, drives without cam-out, and doesn't require a pilot hole. The #2 square drive recess is designed to hold the screw on a correctly sized square bit, which matters when you're reaching into a cabinet box at an awkward angle with one hand on the material. The black finish serves both production shops and on-site installers: it keeps the fastener low-profile inside dark-interior cabinets and does not catch the eye on pocket surfaces that stay visible after installation. Each box holds 1,000 screws, which is the right quantity for a shop building a full run of cabinets or a contractor outfitting multiple units on a kitchen or bath project.
Yes. When driving through 3/4-inch face frame stock into the front edge of a 3/4-inch cabinet side, 1-1/2 inches gives the threads enough depth in the second member to seat firmly without breaking through the panel face.
A pan head bears down on the pocket wall with a flat, wide surface that clamps the joint closed. Flat and bugle heads act as wedges in a pocket bore and can push the workpieces apart or split thin face frame stock rather than drawing them together.
This screw carries a coarse thread, which is suited to softwood, plywood, and sheet goods. For hardwood species such as oak, maple, or cherry, a fine-thread face frame screw is the better choice — it provides more thread engagement in dense grain without the splitting risk of a coarser pitch.
The box contains 1,000 screws. A #2 square drive bit is required for installation; check whether your current bit assortment includes a correctly sized square bit before driving.
The Type 17 Auger point features an extended flute that clears wood fibers ahead of the thread as the screw is driven. This reduces the torque needed to start and seat the screw, which is especially noticeable in denser sheet goods and when driving at the angle required by a pocket-hole jig.
When the job calls for 3/4-inch-to-3/4-inch pocket-hole joinery in softwood or sheet goods, this Würth #6 x 1-1/2" screw is sized and threaded for exactly that work — and a box of 1,000 keeps production moving from the first rail-to-stile joint to the last cabinet on the wall.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WW90260 Mfr# 0614176143961 1 | #2 x 6" Square Drive Insert Bit, 2 Piece Bit |