Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #8 x 3/4-inch truss head machine screw is designed for attaching knobs and pulls to cabinet doors and drawer fronts where minimal thread engagement depth is the priority. The 3/4-inch length suits thin door panels and shallow hardware bases where a longer screw would bottom out or protrude through the back face. The 8-32 thread is the North American cabinet hardware standard, making this screw a reliable match for knobs and pulls from virtually any manufacturer.
The 3/4-inch length is the right choice when the door panel is thin, when the hardware base is shallow, or when the combined stock and hardware thickness leaves little room before the screw tip exits the back face. It works well on frameless cabinet doors, thin slab drawer fronts, and overlay doors where the panel thickness is under 3/4 inch. For standard 3/4-inch cabinet doors with a hardware base that has minimal depth, this length keeps the screw tip from breaking through. If the door and hardware together require more thread engagement, move up to a longer length in this family.
The truss head is wider and flatter than a pan head, so it spreads the clamping load across a broader footprint on the hardware base. That extra bearing area helps the hardware seat firmly without over-tightening. The blunt point is standard on machine screws: it threads into the pre-tapped hole in the knob or pull base and does not self-start in wood, so the hardware's pre-tapped insert or threaded barrel is what engages the screw. The Phillips/Slotted combination recess accepts a #2 Phillips bit for powered installation or a flat-blade driver when that is what is available during a service call or field install.
Cabinet shops running hardware installation on finished boxes reach for a consistent, standard-thread machine screw that loads quickly and drives without fuss. The 100-piece box keeps a working supply on the bench without overbuying for smaller jobs. Installers finishing a kitchen or bath on site benefit from the combination drive: a Phillips bit handles production driving, and a flat-blade driver handles the occasional adjustment or replacement without a bit change. Because 8-32 is universal across cabinet hardware brands, this screw works whether the pulls came from one supplier and the knobs from another.
The 3/4-inch length is the right fit when the door panel is thin or when the hardware base does not have much depth behind the through-hole. A longer screw in a thin door can protrude through the back face or bottom out before the hardware is fully seated. If your door is a standard 3/4-inch panel and the hardware base adds minimal depth, 3/4 inch keeps everything flush.
Yes. The 8-32 thread is the North American cabinet hardware standard, and virtually all knobs, pulls, cup pulls, and bin pulls sold for cabinet use in North America are tapped to accept it. You can use this screw with hardware from different manufacturers on the same project without compatibility issues.
The truss head is wider and lower in profile than a standard pan head. That wider footprint spreads the clamping load across a broader area of the hardware base, which helps the hardware sit flat and firm without concentrating stress on a small area around the hole. It also sits lower against the door face than a taller head would.
A drill/driver with a #2 Phillips bit works well for production hardware installation. An impact driver is generally too aggressive for small machine screws in hardware bases and can strip the recess or over-torque the hardware. A standard drill/driver at a controlled clutch setting is the better choice.
No pre-drilling in the door is needed. The screw passes through a clearance hole in the door and threads into the pre-tapped hole or threaded insert in the hardware base. The blunt point does not engage wood; it only threads into the hardware's tapped recess.
When the job calls for a short, reliable machine screw that fits any standard knob or pull, threads into hardware bases without drama, and gives you the flexibility of two common drive types, this 3/4-inch 8-32 truss head screw is ready to work.
Sold In: 100 Each