Salice Thick Door Hinge For Wide-Swing Full Overlay Doors

This Salice Series 200 hinge is built for thick cabinet doors that need a full overlay fit and a wide 155 degree opening swing, with Silentia soft-close integrated and expanding dowel mounting for a firm, accurate install on both face-frame and frameless cabinets.

Key Features

• Thick door geometry seats the 35mm cup at 13.5mm depth, sized for doors beyond the standard 16 to 22mm range.
• 155 degree opening swings the door nearly flat to the cabinet side for maximum interior access.
• Silentia soft-close damps the door through the final closing arc so it settles quietly without slamming.
• Full overlay straight arm covers nearly the entire cabinet side, leaving only a narrow reveal.
• Expanding dowel mount anchors the base plate into bored dowel holes for a locked, stable connection.
• Face-frame and frameless compatibility with the matching Salice base plate, ordered separately.

What Thick Doors Demand From a Hinge

A standard concealed hinge is engineered for doors 16 to 22mm thick. Push beyond that range and the cup geometry no longer seats correctly, the arm hits the door face at the wrong angle, and the door binds or fails to close flush. This hinge solves that problem with a cup depth and arm geometry matched to thick door stock. The 35mm cup bores into the door at 13.5mm depth, giving the hinge the clearance it needs to carry a heavier, thicker panel through its full arc. The 155 degree swing extends that arc nearly flat, so the open door clears the cabinet opening completely and does not obstruct access to the interior. The Silentia damping system absorbs the momentum of a thick, heavier door over the last few degrees of closing, protecting both the door edge and the cabinet from repeated impact.

Mounting Built for Stability

The expanding dowel mount drives into bored dowel holes in the cabinet side or face frame, expanding to grip the hole walls and resist pull-out. This connection is firmer than a screw-on plate under lateral load, which matters when a thick door applies more leverage to the base plate on every swing. The hinge is steel in a nickel finish. A matching Salice base plate is required and sold separately. Use Salice plates only, as plates are brand-specific and will not connect across brands.

Where This Hinge Belongs

This is the hinge for custom cabinet work, furniture pieces, and specialty builds where doors run thicker than standard cabinet stock and full overlay is the design call. It suits frameless and face-frame boxes equally when paired with the appropriate Salice plate. Cabinet shops working on solid wood doors, thick slab fronts, or furniture-grade panels will find this hinge covers the application that a standard long-arm hinge cannot. For doors in the standard 16 to 22mm thickness range, a standard Series 200 hinge is the right fit instead.

Common Questions

The Right Hinge for Doors That Demand More

When the build calls for thick doors swinging to a wide full overlay with a quiet, damped close, this Salice Series 200 hinge delivers the geometry, the mounting, and the soft-close performance the job requires.