Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge brings Silentia soft-close and full overlay geometry to face-frame and frameless cabinets, finished in nickel and mounted with a direct screw-on connection.
Full overlay doors cover the cabinet side almost completely, which means the hinge geometry has to place the door precisely over the opening edge. The straight arm on this hinge does exactly that, and the 35mm cup bores cleanly into the back of the door at the standard 45mm boring pattern. Once the door is hung, Silentia soft-close takes over at the end of the closing arc, slowing the door so it doesn't make contact with a slam. That cushioned close matters most in face-frame kitchens and built-ins where the door sits close to the frame face and the sound of an uncontrolled close carries.
The hinge arm connects to a Salice base plate on the cabinet, which is ordered separately. Use Salice plates only; plates are brand-specific and not interchangeable with other manufacturers' hardware.
The hinge body is steel with a nickel finish. Nickel coordinates naturally with brushed or satin hardware on pulls, knobs, and slides, which is why it remains the default match for cabinet hardware specified across a full kitchen or bath. Screw-on mounting locks the arm to the plate without a quick-release clip, which suits applications where a fixed, non-removable connection is preferred over tool-free arm engagement. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm let you bring doors to an even reveal once the cabinets are set.
This hinge is the right call on face-frame cabinets where the design specifies full overlay doors and the installer wants a screw-on arm connection rather than a clip-on. It also works on frameless boxes with a compatible Salice plate. Cabinet shops finishing out a job with nickel hardware throughout, remodelers matching existing hardware, and designers specifying a cohesive finish across doors and drawers will find this hinge fits that brief. For doors in the standard 16 to 22mm thickness range, the 35mm cup and 13.5mm cup depth are the right geometry. Doors thicker than 22mm need a thick-door hinge instead.
No. The hinge arm connects to a base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet construction and the door position you need.
The 94 degree opening angle is intentional for full overlay doors on face-frame cabinets where the door geometry limits swing, particularly where adjacent doors or a wall is nearby. It gives reliable daily access without the door traveling into an adjacent surface.
Screw-on means the arm fastens to the plate with screws and stays fixed. Clip-on or snap-on arms engage a latch on the plate and release without tools. This hinge is screw-on, so a screwdriver is used to attach and remove the arm from the plate.
No. Salice plates are specific to Salice hinges. A plate from a different manufacturer will not connect correctly to this arm.
Specify this hinge when the job calls for full overlay doors, a nickel finish that coordinates across the hardware package, and a screw-on connection that stays put.
Sold In: 300 Each