Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice 200 series self-close hinge is a positive angle concealed hinge designed for both residential and commercial cabinets where a 24 degree corner or angled overlay is needed. This C2RBU99 model is part of the Series 200 positive angle hinges line, so it follows a consistent geometry cabinetmakers already use across many Salice installations. As a 94 degree opening hinge, it limits swing to a controlled arc, which helps when doors are close to walls or adjacent cabinets. The hinge is all steel and nickel plated for corrosion resistance, which supports long-term performance in typical cabinet environments. The hinge is permanently self lubricating utilizing environmentally safe lubricants, which means the moving parts are designed to operate smoothly over time without additional lubrication steps during service life.
This 24 degree corner 94 hinge uses a cup depth of only 11 mm, which allows hinge cup boring in doors that cannot accept deeper pockets. The hinge cup edge drilling distance of 3 mm to 6 mm gives some freedom in hole placement, useful when matching existing drilling patterns or working with different door overlays. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw allows fine tuning of reveals without shifting the mounting plate, which can reduce rework once doors are hung. This Series 200 hinge is available in a press-in dowels fastening design, so it can be installed into properly sized cup holes using dowel engagement rather than screw-on cup mounting.
This Salice 200 series self-close hinge is designed for use in both residential and commercial cabinets, so it fits projects ranging from kitchen runs to office or institutional casework. As a positive angle hinge for 24 degree corner situations, it works in cabinet layouts where doors meet at an angle instead of a simple straight overlay, such as corner units or angled end cabinets. The concealed cabinet hinge format keeps the hardware inside the cabinet, supporting a clean exterior look that many jobs demand. The cup depth of only 11 mm allows use on doors with thinner construction or profiled backs where deeper boring would remove too much material. With a hinge cup edge drilling distance of 3 mm to 6 mm, it adapts to different boring patterns on CNC equipment or line boring machines, which can streamline mixed hardware jobs.
This European angled concealed hinge has patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, allowing the door to shift horizontally while staying parallel to the cabinet front. That adjustment range helps align reveals across multiple doors without re-drilling mounting positions, which improves efficiency during installation or punch-list work. Series 200 hinges are available in a press-in dowels fastening design, so the hinge cup locates positively in the bored hole, which can speed assembly on production lines. The hinge is available in self-closing only, so it pulls the door shut as it approaches the cabinet, helping doors seat consistently against the face frame or front edge without added catches. All steel hinge construction with nickel plating supports durability and corrosion resistance, which is important in kitchen and bath environments where moisture and cleaning cycles are normal. Series 200 hinges are designed to work with all Salice mounting plates, providing flexibility to pair this hinge with various plate heights to address different overlays and cabinet constructions. Series 200 hinges exceed ANSI/BHMA Grade 2 standards, indicating they are tested for performance suitable for demanding cabinet applications.
The Salice 200 series self-close hinge is designed for use in both residential and commercial cabinets, so it can be applied across a wide range of casework projects.
The 24 degree corner 94 hinge opens to 94 degrees, providing access to the cabinet interior while helping control door swing in tight installations.
The hinge uses a cup depth of only 11 mm with a hinge cup edge drilling distance of 3 mm to 6 mm, which suits many standard cabinet door boring patterns.
The hinge provides patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw, allowing horizontal reveal tuning after mounting.
The hinge is all steel and nickel plated for corrosion resistance, supporting long-term use in typical kitchen, bath, or commercial cabinet environments.
Series 200 hinges are designed to work with all Salice mounting plates, allowing various plate heights to address different overlays and cabinet constructions.
The Salice 200 series self-close hinge with 24 degree positive angle and 94 degree opening offers a focused solution for angled cabinet doors in residential and commercial work. Its all steel, nickel plated construction, 11 mm cup depth, and 3 mm to 6 mm cup edge drilling distance support practical boring and long service. Patented parallel side-to-side adjustment via the hinge arm screw and self-closing action help achieve consistent reveals and door seating. For projects built around Salice mounting plates and European concealed long arm hinges, this C2RBU99 model provides a compatible option for angled door positions that aligns with established Series 200 performance.
Sold In: 150 Each