Adjustable Plastic Adapter For Release Device Use

adjustable plastic adapter for release device defines this Salice America component as a plastic adapter designed to work with a release device, so it serves as the interface between the cabinet and the push open or push close mechanism in hinge applications. The product sits in the Hinge Push Open/Push Close class, so it supports release devices used in these hinge-driven opening systems. The adapter is described as single or double, which means the same part can be used when one or two adapters are required at the release location, supporting consistent hardware across similar cabinet runs. Its gray color identifies the part visually during layout, which helps installers distinguish it quickly from other small hinge components during setup and adjustment.

Key Details That Support Push Release Work

• The adapter is specified as an adjustable longitudinal plastic adapter for release device, so the body can be shifted along its length, giving flexibility to fine-tune the engagement point between the release device and the door for smoother opening.
• Being in the Hinge Push Open/Push Close product class ties this part directly to push-operated hinge systems, so it works where a controlled push action is needed to trigger a magnetic or mechanical release device.
• The Web Description notes single or double adapters, so one design can serve either configuration at the release point, helping installers standardize parts for similar doors and reduce part variation during cabinet assembly.
• The adapter is identified as plastic, so it presents a consistent contact surface to the release device, which matters for repeatable triggering and helps avoid metal-on-metal marking at the interface point.

Mounting And Drilling Details For Installation

The adapter is specified to be fixed with wood screws, which means it is intended to fasten directly to wood substrates commonly used in cabinet construction. This direct screw fixing gives a secure, non-adhesive installation method that supports repeatable positioning. The drilling requirement is listed as 8+16mm drilling, so the mounting layout relies on 8 mm and 16 mm drilling operations, allowing installers to plan hole patterns using these specific dimensions during fabrication. Because the adapter is longitudinally adjustable, the combination of fixed screw points and sliding adjustment lets installers set the release position, then lock it down once the optimal push point has been reached.

Using This Hinge Adapter In Cabinet Projects

Where This Salice Adapter Fits In Hinge Systems

This Salice America component is categorized under Hinges and Hinge Accessories, so it is intended to work in assemblies built around cabinet hinges. Its role as a plastic adapter for release device positions it between the cabinet structure and the push open or push close release hardware, linking the release device to the door movement. The SAP description, PUSH SING INLINE ADAPTER,MAG LATCH,GRAY, states that it is an inline adapter for a mag latch, so the part is designed to sit along the line of action of a magnetic latch release. Working as a single or double adapter lets it serve installations that require one central contact point or a paired configuration, adding flexibility when aligning doors in larger or heavier front assemblies. Because the adapter belongs to the Hinge Push Open/Push Close product class, it naturally fits in cabinet runs where doors are operated by a push action instead of handles, supporting clean-face designs that still need a defined release point.

Adjustment Features That Support Repeatable Release Action

The Web Description calls this part an adjustable longitudinal plastic adapter for release device, which means the adapter can be shifted along its long axis relative to the mounting screws. That longitudinal adjustability lets installers move the contact point closer to or farther from the door edge, so the push stroke can be tuned to match the door overlay and hinge geometry. Fixing with wood screws creates firm anchor points, while the adjustable slot or mechanism allows fine changes before tightening, helping achieve a crisp release without overtravel. The specified 8+16mm drilling gives precise reference distances for those screw locations, so cabinet shops can program or set drilling equipment to repeat the same pattern across multiple doors. Used as a single or double adapter, the same adjustment behavior carries across each position, which supports consistent feel from door to door in a bank of cabinets using push open or push close hinge systems.

Common Questions About This Salice DP82XXGR Part

Selecting This Adapter For Push Open Hinge Work

The Salice America Adjustable Plastic Adapter for Release Device in gray, part DP82XXGR, offers single or double adapter use, longitudinal adjustment, and 8+16mm drilling with wood screw fixing, so it supports precise release positioning in Hinge Push Open/Push Close cabinet projects.