Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Bainbridge 1928 slide guide is a screw-on nylon spacer designed to position and stabilize drawer slides during installation, keeping the slide at the correct offset from the cabinet side so the drawer runs true from the first open to the thousandth.
Drawer slide installation is a repeatability problem. When a slide sits even a fraction of an inch off its intended position, the drawer binds, the front gaps unevenly, or the slide wears faster on one edge than the other. This guide solves that by acting as a fixed spacer between the slide and the cabinet panel, locking in the correct standoff before a single screw goes into the slide itself. It is especially useful in face-frame cabinet runs where the panel-to-opening relationship varies slightly box to box — the guide gives the installer a consistent reference point rather than a measured gap to hold by hand. Shops running high drawer counts on a tight cycle time will find the guides cut setup time per drawer noticeably.
Nylon polyamide is the right material for this application. It is hard enough to hold position under clamping pressure and through the mechanical stress of screw-on attachment, yet it will not telegraph hard edges into the wood or melamine it contacts. Unlike metal spacers, nylon will not corrode or leave marks on painted or vinyl-wrapped cabinet interiors. The guides are suited to dry, indoor cabinetry environments — standard kitchen, bath, and furniture work where moisture is not a factor.
Cabinet shops running production lines are the primary buyer. A box of 1,000 supports an extended run without interruption, and buying in bulk keeps the per-unit cost low enough that the guides disappear into job cost without a second thought. Installers who do their own builds will find the same value: having guides on hand removes one variable from every drawer installation and makes quality more consistent across a job. This is not a consumer retail item — it is a production consumable priced and packaged for the trade.
No. These are generic spacers that work with screw-on side-mount slide installations where a 9/16 inch standoff matches the required clearance. Confirm the standoff dimension your slide calls for before ordering.
The screw-on design is intended to remain in place as a permanent spacer once the slide is mounted. It continues to support the slide position through the life of the cabinet.
Yes. Nylon polyamide will not abrade or stain the melamine or vinyl surfaces it contacts under normal indoor installation conditions.
Yes, as long as the 9/16 inch standoff suits the installation geometry. Face-frame work where a consistent offset from the frame to the slide is needed is a particularly common use case.
When every drawer in a run needs to open and close the same way, the details behind the panel matter — and this guide is one of them.
Sold In: 1 Box