Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster with 3 inch hard rubber wheel is a light-duty stem mounted caster built for controlled movement on office equipment, light medical stands and carts, chairs and stools, and store fixtures. The zinc plated finish provides corrosion resistance, so the caster keeps working smoothly in typical indoor environments where moisture or cleaning agents can cause rust on unprotected metal. A doubleball bearing swivel lets the caster rotate freely under load, which helps equipment change direction with less effort. The hard rubber wheel material supports rolling on common hard flooring while maintaining the stated load capacity of 100 lb, so equipment stays mobile without overloading the caster. A riveted axle secures the wheel to the yoke, creating a solid connection that helps the assembly handle repeated rolling without loosening under normal use conditions.
This caster uses a grip ring mounting type, so the stem presses into a properly sized socket or tube for a friction-based hold during service. The grip ring stem size of 7/16 inch by 1-7/16 inch defines both the stem diameter and the insertion length, which directs fabricators and installers when sizing or selecting sockets in mating equipment legs or frames. Stem mounted casters like this keep the mounting footprint compact at the contact point, which is useful on chairs, stools, and slender stand legs where top plates may not fit. The swivel type design lets the wheel rotate around the vertical stem while mounted, so carts and fixtures can pivot freely without reorienting the frame.
The stated applications for this caster include office equipment, light medical stands and carts, chairs and stools, and store fixtures, so it is aimed at environments where light loads and frequent repositioning are common. On office equipment and chairs, the 3 inch wheel diameter and narrow 13/16 inch tread width keep overall furniture height moderate while still allowing smooth rolling over hard floors. For light medical stands and carts, the 100 lb load capacity supports typical instruments or supply loads within a controlled range, which supports consistent maneuverability in hallways or exam rooms. On store fixtures, the stem mounted grip ring design fits into tubular legs or sockets, which lets merchandising racks or small displays roll for cleaning or layout changes without changing the basic frame construction.
The wheel type is specified as hard rubber, so the rolling surface stays firm under the 100 lb load capacity and helps maintain roundness for consistent rolling. This matters on equipment that is moved frequently, because a firm tread resists deformation that could otherwise increase push effort. The doubleball bearing swivel spreads the turning forces across two sets of balls, which helps the caster start rotating with less resistance when a cart or chair is turned. That interaction between swivel and hard rubber wheel lets the unit track and pivot smoothly during short moves in offices, medical spaces, or retail areas. The riveted axle holds the wheel securely in the fork, which stabilizes the wheel position so the tread stays aligned to the swivel path during repeated use.
The C-L30GRRS is a DH Casters swivel caster with a 3 inch hard rubber wheel and grip ring stem, so it is designed for light-duty, maneuverable mounting on compatible equipment.
This caster has a load capacity of 100 lb, so it is suited to light-duty applications where the combined load per caster stays within that rating for proper rolling performance.
This caster uses a grip ring stem size of 7/16 inch by 1-7/16 inch, so it fits sockets or tubing designed for that diameter and insertion depth in legs or frames.
The caster is specified for office equipment, light medical stands and carts, chairs and stools, and store fixtures, so it targets indoor equipment that moves frequently under light loads.
The caster is zinc plated for corrosion resistance, so the metal components better resist rust in typical indoor environments and maintain swivel and wheel function over time.
The caster uses a doubleball bearing swivel, which supports smooth rotation under load so equipment can pivot and change direction with less effort during normal movement.
The DH Casters swivel caster with 3 inch hard rubber wheel and grip ring mount brings together a 100 lb load capacity, zinc plated corrosion resistance, and doubleball bearing swivel for light-duty use. The 7/16 inch by 1-7/16 inch grip ring stem targets sockets sized for this format, so chairs, stands, and fixtures that match this stem dimension can use it for maneuverable support. For office equipment, light medical stands and carts, chairs and stools, and store fixtures built around a stem mounted caster, this model provides a defined set of dimensions and performance characteristics to match during planning or replacement.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CCL30GRRSB Mfr# C-L30GRRSB | DH Caster 3" Grip Ring Mount Swivel Caster, Hard Rubber, With Brake, 100 lb, C-L30GRRSB |