Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nose roller 40000lb 4x6 cast iron steel describes a heavy-rated wheel built for demanding material handling where loads sit for long periods. The DH Casters 4 inch cast iron / steel wheel is classified as a wheel in caster accessories, so it serves as the rolling element in a caster or nose roller assembly without adding swivel or mounting features itself. The steel material is specified as long-lasting and resistant to chemicals, so it holds up where solvents, oils, or cleaners are part of everyday shop work. The wheel is described as working great on concrete and other hard surfaces, which fits common warehouse and production floors. It is also stated to operate effectively from minus 40 degrees F to 500 degrees F, so it stays functional in freezers, hot-process areas, or seasonal dock conditions where temperature swings would cause weaker wheels to fail.
The wheel is categorized under caster accessories, so it is intended to pair with a caster or nose roller structure that carries the wheel around an axle rather than being used on its own. The SAP description notes a 4 inch by 6 inch cast iron and steel format, so layouts built around comparable wheel dimensions can integrate it without major dimensional changes. The wheel is specified to work great on concrete and other hard surfaces, so it fits installations where hard floor contact is expected instead of soft or uneven ground. Flooring types are listed as asphalt, concrete, smooth steel, and track, so job planning can align wheel positions with those specific surfaces for consistent rolling. The extreme temperature capability from minus 40 degrees F to 500 degrees F allows installations in cold storage or hot zones without swapping wheel types seasonally.
The SAP description identifies the product as a nose roller rated at 40000 lb with a 4 inch by 6 inch cast iron and steel wheel, so it suits heavy handling points on equipment where concentrated loads need a compact but strong roller. The category of caster accessories clarifies that it functions as the rolling core within a larger caster or nose roller arrangement, so it is appropriate anywhere a robust wheel must support weight while another component provides mounting and steering. The flooring types list asphalt, concrete, smooth steel, and track, so docks, warehouse aisles, shop floors, and guided track systems are natural fits where a hard wheel can run on hard surfaces. The note that it works great on concrete and other hard surfaces highlights its role in industrial-style floors, so it supports movements along rigid paths rather than soft or irregular terrain where a different wheel style would typically be used. The combination of cast iron and steel construction with a 40000 lb rating means the wheel targets high-capacity installations in material handling, staging, or heavy equipment support.
The steel material is specified as not developing a flat spot, so even when heavy loads remain stationary, the contact patch does not permanently deform, keeping startup rolling resistance more predictable from job to job. The wheel is described as long-lasting and resistant to chemicals, so frequent exposure to oils, solvents, or cleaners in production environments does less to alter its surface, helping it maintain predictable traction and wear patterns. The operating range from minus 40 degrees F to 500 degrees F means the wheel behaves consistently across wide temperature swings, so schedules do not have to change wheel types as work shifts between cold storage, ambient zones, and hot process areas. Being a 4 inch by 6 inch wheel supports repeatability when matching or replacing wheels in multi-wheel assemblies, because identical dimensions help keep load sharing and alignment even across all positions. The flooring compatibility with asphalt, concrete, smooth steel, and track gives installers a clear set of surfaces where the wheel is expected to roll effectively, so layout plans can treat these zones as the primary paths for heavy loads. The fact that it works great on concrete and other hard surfaces ties these details together by signaling that the wheel is optimized for firm, stable flooring where high load ratings and hard tread interaction produce reliable rolling behavior.
The W-NR46 is a DH Casters 4 inch cast iron and steel wheel classified as a wheel in caster accessories, so it serves as the rolling component in a heavy-duty nose roller or caster setup.
The wheel is described as a nose roller rated at 40000 lb, so it is suited to very high load points where concentrated weight must be supported on a compact rolling surface.
The wheel is specified to work great on concrete and other hard surfaces, with flooring types listed as asphalt, concrete, smooth steel, and track for planned rolling paths.
The steel material is stated to not develop a flat spot, so heavy stationary loads do less permanent damage to the wheel, improving how easily loads start moving again.
The wheel operates effectively from minus 40 degrees F to 500 degrees F, so it remains functional in cold storage, ambient warehouse areas, and high-heat processing zones.
The product is categorized under caster accessories, so it integrates into caster or nose roller assemblies that supply the mounting frame while this component supplies the rolling action.
The DH Casters 4 inch cast iron and steel wheel described as a nose roller rated at 40000 lb aligns with applications where concentrated heavy loads must roll on hard industrial floors. The specified resistance to chemicals and long-lasting behavior supports use in shops or plants where spills and cleaners are common around equipment. The operating range from minus 40 degrees F to 500 degrees F lets one wheel type span cold storage through high-heat zones, simplifying wheel choice across different areas. The confirmation that it works great on concrete and other hard surfaces, along with flooring types such as asphalt, concrete, smooth steel, and track, helps match this wheel to the paths you plan for heavy moves. For projects calling for a compact, high-capacity nose roller element within caster accessories, this W-NR46 wheel offers the defined material, temperature, and floor-surface capabilities needed for consistent rolling support.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CCWNR44 Mfr# W-NR44 | DH Casters 4" Cast Iron / Steel Wheel, - W-NR44 |