Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Grass DynaPro 18 inch undermount drawer slide is a soft-close, full extension slide that mounts under the drawer to keep hardware out of sight while supporting smooth motion. The slide uses a fully enclosed liquid damper that slows the drawer travel and glides it gently to a stop, which helps reduce slamming and wear in everyday use. Roller bearing construction supports consistent running performance, so drawers move predictably even under regular opening and closing. The system is designed as a left undermount slide, pairing with the matching right side to form a complete undermount set for the drawer. Synchronization in the running system supports excellent running performance by coordinating the slide movement, which matters when precise, parallel drawer travel is needed in cabinetry. This model is identified by manufacturer part number F130135017299, giving a clear reference when matching slides across multiple cabinets or future projects.
This Grass DynaPro 18 inch undermount drawer slide provides 1D, 2D, and 3D adjustment in height, side, and depth, so the installer can fine-tune the drawer front position within the face frame or cabinet opening. The adjustment range lets fronts be aligned flush across adjoining drawers and doors even when cabinet openings vary slightly. The slide works with 16 mm, or 5/8 inch, and 19 mm, or 3/4 inch, drawer material, so standard thickness drawer boxes in these sizes can be set up without changing to a different slide family. Self-latching front locking devices provide maximum connection of drawer slide at the front interface, which helps the drawer box engage solidly on the slide for repeatable removal and reinstallation during fitting or service.
The Grass America DynaPro 18 inch soft close full extension undermount drawer slide belongs in cabinet projects where concealed hardware and precise motion are important. The design is suitable for drawers up to 48 inches wide with no additional synchronization hardware, so a single slide set can handle typical kitchen, bath, or office drawer widths within that range. This capability allows wider storage drawers to be laid out without introducing extra synchronization components, simplifying the slide selection. Because the slide is part of the DynaPro undermount drawer slides class, it fits into projects that standardize on this system for multiple drawer sizes. The roller bearing and synchronized running performance support applications where multiple drawers sit in stacked banks, helping each drawer open and close smoothly so the entire run feels consistent to the user.
The 1D, 2D, and 3D adjustment capability in height, side, and depth gives the installer multiple planes of fine-tuning, which matters when aligning drawer fronts across a wall of cabinetry or matching to fixed countertops and trim. By using these adjustments, small variations in cabinet construction can be compensated at the slide and locking device connection, helping reduce rework on drawer boxes. The soft-close system with a fully enclosed liquid damper supports repeatable closing behavior, so every drawer in a bank decelerates similarly and finishes in the same position against face frames or front edges. Self-latching front locking devices provide maximum connection of drawer slide, giving a firm, defined interface between drawer and slide that supports accurate repositioning of the drawer after removal. The suitability for 16 mm and 19 mm drawer material allows a shop to standardize box construction in these thicknesses while still taking advantage of the same F130135017299 undermount slide, which simplifies planning and reduces mixups between different slide types.
The Grass F130135017299 is a DynaPro 18 inch soft-close full extension undermount drawer slide, so it mounts under the drawer and provides complete travel with controlled closing.
This DynaPro undermount slide is suitable for drawers up to 48 inches wide with no additional synchronization hardware, allowing use on many standard and wider cabinet drawers.
The slide works with 16 mm, or 5/8 inch, and 19 mm, or 3/4 inch, drawer material, so common drawer box thicknesses in those sizes are supported.
The DynaPro slide offers 1D, 2D, and 3D adjustment in height, side, and depth, allowing the drawer front position to be tuned precisely in the cabinet opening.
The soft-close function uses a fully enclosed liquid damper that slows the drawer near the end of travel and glides it gently to a stop for controlled closing.
Self-latching front locking devices provide maximum connection of drawer slide at the front, giving a secure interface that helps maintain alignment when drawers are removed and reinstalled.
The Grass DynaPro 18 inch undermount drawer slide F130135017299 combines soft-close, full extension travel, synchronized running, and multi-dimensional adjustment to support accurate, repeatable drawer performance. Its suitability for 16 mm and 19 mm drawer material and use on drawers up to 48 inches wide gives flexibility across many cabinet layouts. When a project calls for a concealed undermount slide with liquid-damped soft closing and precise front alignment control, this DynaPro model offers a consistent reference point by part number for planning multiple openings and future matching work.
Sold In: 364 Each