Olympus Lock, Inc Straight Cam 5/8 " Length - 130049

Olympus Lock Straight Cam 5/8 Length Purpose

Olympus Lock straight cam 5/8 length defines this part as a straight cam with a 5/8 inch length, which sets the throw distance and reach of the Combi-Cam Ultra lock, helping the cam engage locker or cabinet frames as designed. The cam is part of the Combi-Cam Ultra 3-dial rectangular combination cam or locker lock, so it works as the moving piece that actually secures the door or drawer when the combination is set correctly. Because the product is in the Magnetic Key and Keyless Locks class, it supports keyless operation through the 3-dial mechanism while still working within typical woodworking and cabinet applications. The Olympus Lock, Inc brand and 130049 part number identify this as the specified straight cam for the Combi-Cam Ultra body, which matters when matching new installations or replacements on existing lockers or cabinets.

Key Functional Details For Daily Lock Use

• The 5/8 inch straight cam length creates a defined engagement distance, which helps the Combi-Cam Ultra lock catch properly on the strike or frame in common locker and cabinet layouts.
• The Combi-Cam Ultra 3-dial rectangular combination design allows the cam to be operated by dialed code, which supports keyless access in locker and cabinet environments where multiple users may need entry.
• The lock features key override capability, which lets the cam be turned with an override key when needed, helping facilities keep control during lost combination situations or administrative access.
• Code retrieval capability on the Combi-Cam Ultra means the set combination can be recovered, which reduces lock replacements when users forget codes but the cam and lock body are still operating correctly.
• All-metal construction around the cam and lock body provides a solid mechanical interface, which supports consistent movement of the 5/8 inch straight cam in repeated locker or drawer use.
• The design secures with up to 1,000 possible combinations, which expands code options and helps differentiate individual lockers or cabinets sharing the same style of straight cam lock.

Mounting The Straight Cam For Clean Operation

The Combi-Cam Ultra lock with this 5/8 inch straight cam can be mounted vertically for doors, which positions the cam to swing behind a cabinet or locker frame when the code is dialed correctly. The same lock can also be mounted horizontally for drawers, letting the straight cam travel into a catch or frame section as the drawer closes. This vertical or horizontal mounting flexibility means the 5/8 inch straight cam can serve both door and drawer layouts, helping maintain a consistent lock style across different cabinet sections. Because the cam is straight rather than offset, its 5/8 inch length translates directly into the reach from the lock spindle center to the locking point, which supports predictable layout measurements during cabinet or locker planning.

How This Combi-Cam Ultra Cam Works In Practice

Where The 5/8 Inch Straight Cam Fits Best

The Olympus Lock, Inc 5/8 inch length straight cam is described as ideal for locker applications, which positions it well for storage lockers and similar compartments that benefit from keyless access. In a vertical installation for doors, the straight cam swings behind a strike surface on the locker frame when the dials align to the chosen code, helping keep the door closed until the combination is redialed. On horizontal drawer layouts, the same straight 5/8 inch cam travels into a receiver or frame edge as the drawer reaches its closed position, holding the drawer against the cabinet until the 3-dial rectangular combination is used to release it. Because the lock is part of the Magnetic Key and Keyless Locks category, it serves applications where daily users rely on the 3-dial mechanism rather than traditional keys to move the cam between locked and unlocked positions.

Why These Lock Details Support Repeatable Results

The Combi-Cam Ultra 3-dial rectangular combination system works directly with the straight cam, so every correctly dialed code aligns the internal mechanism and turns the 5/8 inch cam through a consistent arc, which supports repeatable locking and unlocking across many cycles. Key override capability interacts with that same cam drive, permitting a key to move the 5/8 inch straight cam even when the dials are not positioned at the current combination, which helps maintain access schedules when codes change or users forget their settings. Code retrieval capability ties into the combination system by allowing the existing code to be read, so the operator can continue using the same lock body and straight cam rather than changing hardware when a combination is unknown. The all-metal construction around the cam and mechanism provides a rigid structure for the dials, cam spindle, and 5/8 inch arm, which supports smooth motion in both vertical door mounting and horizontal drawer mounting. With up to 1,000 possible combinations available, facilities can assign different codes to lockers or cabinets using identical 5/8 inch straight cams, helping organize access while keeping the mechanical motion of the cam consistent from opening to opening.

Common Questions About Olympus Straight Cam 130049

Selecting This Cam For Locker And Cabinet Use

The Olympus Lock, Inc straight cam 5/8 inch length with Combi-Cam Ultra 3-dial rectangular combination operation offers a defined arm reach, which supports precise engagement with locker or cabinet frames. Vertical mounting for doors and horizontal mounting for drawers lets this same 5/8 inch straight cam serve multiple opening styles across a project. With all-metal construction, key override, code retrieval capability, and up to 1,000 possible combinations, this Olympus Lock 130049 component fits projects that rely on consistent mechanical motion from a known straight cam size.