Knape and Vogt Simply Put Series White 14"L x 2"D x 3"H x Soft-close Sink Tip Out Tray, No Tab Stop - SP-PSF-14-SH1-W

Sink Tip Out Tray For Sink-Front Storage

Sink tip out tray from Knape and Vogt turns unused sink-front space into a cabinet organizer, converting dead front panels into a reachable spot for small items right where work happens at the sink. The Simply Put Series identity ties this tray to a consistent product family, helping installers match components across a job. The 14 inch length, 2 inch depth, and 3 inch height define a compact footprint, so the tray occupies the narrow cavity behind a standard sink false front without crowding internal plumbing. The soft-close function controls the tipping motion, guiding the tray shut in a controlled way that helps reduce slamming against the face frame over repeated use. The white finish presents a clean interior look that blends with common light-colored cabinet interiors. Category placement under sink tip out trays and accessories confirms the product role as a dedicated solution for front-of-sink storage needs.

Key Sink Tip Out Tray Details For Projects

• The 14 inch length defines the working span of the Knape and Vogt tray, helping it align with typical sink-front openings while still leaving room for adjacent fronts on multi-bowl or drawer configurations.
• The 2 inch depth sets how far the tray extends into the cabinet cavity, leaving workable clearance near plumbing runs so fronts can operate without frequent interference.
• The 3 inch height establishes the vertical profile inside the opening, allowing storage of low-profile items while keeping the unit clear of most sink basins and support rails.
• The soft-close description indicates motion control built into the tray kit, helping the tip-out action settle smoothly against the cabinet instead of snapping shut.
• The white color provides a neutral interior appearance that coordinates with common painted cabinet boxes, keeping the visible storage area uniform when the front is opened.

Installation Factors For The Soft-Close Sink Tray

The 14 inch length of the Knape and Vogt SP-PSF-14-SH1-W tray sets the main layout requirement at the sink-front opening, guiding where an installer positions hinges or tip-out mechanisms on the false front. The 2 inch depth and 3 inch height affect internal clearances, allowing the tray to occupy the space behind the false drawer front while leaving a corridor for supply lines or drain components. The soft-close sink tip out tray action influences hinge and bracket placement, because the motion system needs a consistent swing path to control closing. The product class designation as a sink tip out tray and accessory positions this unit within standard kitchen and bath cabinet work, aligning it with familiar installation sequences for retrofit or new cabinet builds.

Using The SP-PSF-14-SH1-W Tray In Real Jobs

Where This Soft-Close Sink Tip Tray Fits Best

The Knape and Vogt Simply Put Series SP-PSF-14-SH1-W tray is described as a sink tip out tray cabinet organizer kit, so its primary use is behind a false front at a kitchen or bath sink. The 14 inch by 2 inch by 3 inch dimensions position it as a fit for narrow front spaces, such as standard single-front sink bases where interior depth is limited by basins and bracing. As a white sink tip out tray, it aligns visually with light cabinet interiors or white sink bases, which matters on open fronts where interior color can be seen during every use. The soft-close function suits higher-traffic areas, such as main kitchen sinks, where controlled closing helps the front settle consistently against the frame.

Why These Sink Tray Details Support Repeatable Results

The identified product class as sink tip out trays and accessories signals that the SP-PSF-14-SH1-W follows established dimensions and motion patterns used in cabinet hardware layouts, which supports repeatable results across multiple bases on a project. The 14 inch length and 3 inch height create a predictable rectangle for layout, so installers can transfer measurements from one sink base to the next without rethinking the basic opening size. The 2 inch depth limits intrusion into the cabinet, helping keep a consistent clearance plane in front of plumbing, which reduces the likelihood of needing field modifications when cabinets share similar sink and drain layouts. The soft-close sink tip out tray operation delivers a controlled return stroke each time the front is closed, allowing the front and tray to contact the face frame in the same way over repeated cycles, which supports consistent alignment over the service life of the cabinet. The Simply Put Series branding associates the tray with a single manufacturer family, Knape and Vogt, which simplifies product identification and reorder decisions when the same solution is needed on future phases or matching renovations.

Common Questions About This Sink Tip Out Tray

Selecting This Sink Tip Tray For Your Project

The Knape and Vogt Simply Put Series white 14 inch by 2 inch by 3 inch soft-close sink tip out tray is purpose-built to turn unused sink-front space into organized storage. The defined dimensions and soft-close motion give installers clear constraints for planning cabinet layouts. For projects that call for a branded sink tip out tray cabinet organizer kit from a recognized manufacturer, the SP-PSF-14-SH1-W provides a clearly specified option ready to integrate into kitchen and bath cabinet runs.