Knape And Vogt Simply Put Pullout Shelf Use

Knape and Vogt Simply Put pullout shelf is a 20-1/2 inch 1-shelf pullout designed as a base cabinetry organizer, so it brings stored items forward instead of leaving them buried in the back of a cabinet. The product sits in the Base Cabinetry Organizers and Fillers class, which positions it for use in lower kitchen or bath cabinets where full-depth access is needed. A 21 inch minimum cabinet opening is specified, which defines the cabinet interior width this pullout shelf is sized to work within typical framed or frameless layouts. The shelf uses soft-close slides, so movement is controlled at the end of travel, which helps doors and fronts close more gently during everyday use. The frosted nickel finish is identified in the web description, giving the pullout shelf a neutral metallic look that coordinates with many modern and transitional cabinet hardware finishes.

Key Pullout Shelf Details For Cabinet Projects

• The 20-1/2 inch 1-shelf pullout size defines the depth and capacity footprint, which matters when planning storage layouts inside a base cabinet run.
• Placement in Base Cabinetry Organizers and Fillers indicates the pullout is intended for base cabinets, helping focus design decisions on lower storage areas.
• The 21 inch minimum cabinet opening specification sets a clear cabinet opening requirement, guiding which cabinet widths can accept this pullout without interference.
• Soft-close slides on the pullout shelf manage closing speed, which supports smoother movement and helps reduce impact inside the cabinet during repeated use.
• The frosted nickel finish on the pullout provides a muted metallic appearance, which visually ties in with common nickel-toned knobs, pulls, and other exposed hardware.

Installation Fit For 21 Inch Cabinet Openings

The stated 21 inch minimum cabinet opening means this Knape and Vogt Simply Put 20-1/2 inch pullout shelf is sized to work within base cabinets that present at least that clear opening, which is important when aligning fronts and adjacent hardware. Knowing the depth as 20-1/2 inches allows planning against cabinet interior depth so the pullout shelf can move on its soft-close slides without contacting the back. The soft-close slide feature affects how the shelf travels in and out of the opening, which is relevant when positioning fronts relative to hinges and neighboring pull-out systems. Because the product sits in the Base & Wall Cabinet Pull-Out Systems category, it fits into layouts where pull-out components must share space while still allowing full extension.

How This Pullout Shelf Fits Real Cabinet Work

Where This Base Pullout Shelf Is Used

This Knape and Vogt Simply Put 20-1/2 inch 1-shelf pullout shelf is identified as a Base Cabinetry Organizers and Fillers product, so it is oriented toward base cabinets in kitchen and bath projects. The 21 inch minimum cabinet opening aligns with common base cabinet widths, letting the pullout serve in standard cabinet modules where interior space needs to be brought forward. Being part of the Base & Wall Cabinet Pull-Out Systems category places the shelf among other sliding storage elements, which is useful when planning coordinated pull-out solutions along a run. The frosted nickel finish allows the pullout to sit behind doors while still presenting a finished, uniform appearance whenever the shelf is extended during normal use.

Details That Support Repeatable Cabinet Installations

The defined 20-1/2 inch pullout shelf dimension gives a consistent front-to-back size, which matters when repeating the same installation across multiple base cabinets with similar interior depths. Soft-close slides on this Knape and Vogt SP-MUBSC-20-FN pullout shelf provide a predictable closing action, helping doors, fronts, and adjacent organizers operate in a coordinated way across a bank of cabinets. The 21 inch minimum cabinet opening establishes a straightforward sizing rule, allowing designers and installers to repeat this product in any cabinet that meets that opening requirement. The frosted nickel finish creates a consistent visual cue across several units, which can support a unified look when multiple pullout shelves are used in the same kitchen or bath project. The manufacturer part number SP-MUBSC-20-FN clearly identifies this specific configuration, helping tradespeople call out the same pullout shelf reliably on drawings, purchase lists, and project documentation.

Common Questions About This Pullout Shelf

Selecting This Pullout Shelf For Cabinet Runs

This Knape and Vogt Simply Put pullout shelf combines a 20-1/2 inch 1-shelf layout, frosted nickel finish, and soft-close slides, so it is suited to base cabinetry organizer roles. The 21 inch minimum cabinet opening requirement defines where it can be applied in a run of cabinets. For projects needing a defined base cabinet organizer with soft-close movement and a neutral metallic finish, this SP-MUBSC-20-FN pullout shelf offers a clearly specified option that can be repeated wherever cabinet openings match its stated dimensions.