Sidelines Ironing Board 18-11/16"W x 14"D x 4-17/32"H, - CROIBSL-14-MB-1

Sidelines Rotating Ironing Board For Cabinet Use

Sidelines rotating ironing board gives you a built-in ironing surface that pivots out of a cabinet partition for use, then tucks away when not needed. The board is designed as a cabinet-mounted ironing solution, so installers can create a dedicated ironing station inside a cabinet run or closet layout where space is at a premium but regular ironing is still required.

The specified ironing board size of 18-11/16 inches wide by 14 inches deep by 4-17/32 inches high defines the footprint the assembly occupies in the cabinet, which helps lay out partition spacing and clearances accurately during design. The manufacturer part number CROIBSL-14-MB-1 ties this board to Sidelines catalog data, giving shops a consistent reference when repeating the same cabinet ironing solution across multiple jobs.

Key Sidelines Ironing Board Details For Projects

• The requirement that it fits any partition at least 14 inches deep means the cabinet partition depth is the critical dimension, guiding carcass design so the ironing unit sits fully supported without projecting beyond the cabinet interior.
• The steel mounting frame provides a rigid structure for fastening the assembly to the partition, which supports the rotating mechanism and helps the ironing surface feel solid when the board is swung out under load.
• The board locks in place for stability, so once rotated to the working position it resists unwanted movement, giving the user a steady surface for ironing and reducing the chance of the board shifting during use.
• The 360 degree rotating mechanism allows the board to pivot through a full circle, letting the user orient the ironing surface to the most convenient angle relative to the surrounding space and cabinet opening.
• The soft-close, over-travel mechanism with built-in stop controls the motion as the board is rotated back toward its stowed position, which helps the board return smoothly and land consistently against the internal stop inside the cabinet.
• The tan canvas, 100 percent cotton cover provides a fabric ironing surface over the board, giving a familiar pressing feel while the neutral tan color coordinates easily with a range of interior cabinet finishes.

Installation Fit And Cabinet Partition Alignment

The fit guidance that it works with any partition at least 14 inches deep sets the baseline installation condition, so cabinet makers can size side panels or internal partitions to that depth to house the ironing unit. The steel mounting frame creates a defined interface between the board and the cabinet partition, letting installers fasten the frame to a stable vertical surface. Because the assembled height is listed as 4-17/32 inches, designers can reserve vertical space within the cabinet bay to accommodate the closed board above shelves or below hanging items. The 18-11/16 inch width dimension helps in planning partition spacing inside a taller cabinet, so the stowed board clears adjacent components and doors when rotated in and out.

Where This Rotating Ironing Board Works Best

Cabinet And Partition Applications For This Board

The classification under ironing board cabinets and pull-outs makes this Sidelines rotating ironing board suited to built-in cabinet applications where a concealed ironing surface is desired. By specifying that it fits any partition at least 14 inches deep, the product targets cabinets or closet systems with enough interior depth to hold the full 14 inch deep board while closed. The 18-11/16 inch width lets designers place the unit within a vertical cabinet bay or between closet uprights without exceeding typical cabinet interior widths. Because the board height is 4-17/32 inches, it can occupy a defined zone inside a tall cabinet, leaving remaining vertical space free for shelving or hanging storage above or below.

The steel mounting frame is important in these cabinet and partition applications because it ties the rotating mechanism to a sturdy vertical structure rather than loose shelving, supporting the board as it swings out into the room. The rotating ironing board product class and Sidelines branding position this unit for integrated cabinetry projects where a consistent supplier and part number, CROIBSL-14-MB-1, is used across multiple installs. This lets shops standardize on a known board size when designing recurring cabinet ironing stations in kitchens, laundry rooms, or closet layouts that share similar cabinet depths and internal partition geometry.

Rotation, Stability, And Workflow Benefits In Use

The 360 degree rotating mechanism allows the board to pivot fully around its mount, so the user can bring the ironing surface parallel or perpendicular to the cabinet face depending on room layout and personal preference. Because the board locks in place for stability, once rotated into the working orientation it stays fixed, which helps maintain a stable pressing surface throughout an ironing session. The soft-close over-travel mechanism with built-in stop manages the final part of the rotational movement as the board is put away, guiding it gently into its stored position so it seats against the same stop point each time.

This controlled motion supports predictable clearances between the board and surrounding cabinet components, which matters when the unit is installed close to doors, face frames, or adjacent storage. The tan canvas, 100 percent cotton cover on the board provides a textile surface suitable for ironing, so garments contact a familiar cotton layer rather than bare board material during pressing. The overall 18-11/16 inch width, 14 inch depth, and 4-17/32 inch height dimensions make the board compact enough for integration in many cabinet interiors while still providing a defined ironing area that can be quickly rotated out, locked in place, then rotated back into the cabinet when the task is finished.

Common Questions About The Sidelines Ironing Board

Select This Rotating Board For Cabinet Projects

The Sidelines rotating ironing board CROIBSL-14-MB-1 offers a defined 18-11/16 inch by 14 inch by 4-17/32 inch assembly that mounts to a partition at least 14 inches deep, giving cabinet shops a repeatable built-in ironing solution. With its steel mounting frame, 360 degree rotation, locking position, and soft-close over-travel mechanism with built-in stop, the unit is set up for stable use and controlled stowing inside a cabinet. The tan canvas, 100 percent cotton cover completes the ironing surface, so adding this unit allows a concealed, pivoting ironing station to be integrated directly into cabinet or closet designs.