19-1/2" x 13-1/2" x 21" Wide Tilt-Out Wire Hamper, Satin Nickel

Tilt-Out Wire Hamper For 21 Inch Cabinets

Tilt-out wire hamper from Sidelines is built to fit a minimum cabinet opening of 21 inches, so it works where standard tilt-down hamper cabinet doors are used in closet or laundry cabinetry. The hamper measures 19-1/2 inches deep by 13-1/2 inches wide by 21 inches high, which sets clear planning dimensions when laying out cabinet depth, door size, and interior clearance. The unique, slanted rim design is engineered to provide clearance with tilt-down hamper cabinet doors, helping the door swing and the basket tilt without interference. This rim shape gives the basket room to pivot inside the opening, which supports smoother operation in a fixed cabinet box. Satin nickel finish on the wire gives the basket a clean, neutral look that coordinates with common closet and cabinet hardware finishes in organizing projects. The product is sold per each, which aligns ordering directly to the number of cabinet openings being outfitted.

Key Wire Hamper Details For Cabinet Projects

• The 19-1/2 inch depth works with typical cabinet carcass depths, which helps the hamper sit fully inside the opening while leaving space for door swing and tilt action in closet or laundry layouts.
• The 13-1/2 inch width allows the hamper to clear a 21 inch minimum cabinet opening, leaving side space for hinges and face frame details that often reduce usable interior width.
• The 21 inch height sets a predictable interior vertical space, which supports planning for shelves or hanging sections above the hamper without interfering with the tilt path.
• The unique, slanted rim design provides additional clearance at the front edge, which helps the top of the hamper move past the tilt-down door panel as it opens and closes.
• The satin nickel finish on the wire basket coordinates with satin nickel closet and cabinet hardware, supporting a consistent appearance across an entire storage installation.
• The product is classified under hampers for shelf, closet and garage organization, which ties directly into organizing laundry or clothing in built-in cabinets.

Mounting And Movement In Tilt-Down Hampers

The Sidelines tilt-out wire hamper uses a unique, slanted rim design to create clearance with tilt-down hamper cabinet doors, so the movement of the basket works with the motion of the door. This geometry allows the top of the hamper to swing away from the door edge as it tilts, reducing contact points inside the opening. Heavy gauge 2.8 mm and 5.8 mm steel wire construction provides a rigid frame, which helps the hamper stay square on its mounting points during repeated tilting. The minimum cabinet opening of 21 inches defines the front clear opening needed, which supports accurate sizing of face frames or frameless cabinet gaps for smooth tilt action. Satin nickel finish on the wire fits into cabinet runs that already use satin nickel components, tying the moving basket into the surrounding hardware visually while it operates.

How This Hamper Works In Cabinet Layouts

Using The Sidelines Tilt-Out Hamper In Cabinets

This Sidelines tilt-out wire hamper is sized for cabinets with a minimum 21 inch opening, so it is suited to tilt-down hamper cabinet doors in closet or laundry sections built around that clear width. The 19-1/2 inch depth lets the basket extend back into the cabinet while still working within typical closet cabinet depths, which is useful when the same vertical run also holds shelving or hanging space. At 21 inches high, the hamper occupies a defined vertical zone, making it practical to stack other storage components above or beside it without cutting into its tilt range. Classification under shelf, closet and garage organization, in the hampers product class, places this basket directly in cabinet-based laundry and clothing storage applications where a built-in, front-tilt hamper is required.

Details That Support Repeatable Tilt-Out Performance

The unique, slanted rim design is central to how this tilt-out wire hamper interacts with tilt-down hamper cabinet doors, because it creates a shaped clearance zone where the door panel and hamper edge pass by each other. That clearance assists repeatable movement when the door is opened and closed many times in daily use. Heavy gauge 2.8 mm and 5.8 mm steel wire construction gives the frame strength, so the hamper maintains its shape at the contact points where flap stay and door mounting bracket hardware connect. This rigidity supports consistent alignment between the moving basket and the fixed cabinet opening. The satin nickel finish on the wire integrates visually with satin nickel hardware throughout closets or garages, helping the moving component blend into the overall system. The manufacturer part number CTOHBSL-211419-SN-1 identifies this exact configuration for repeat ordering across multiple cabinet openings or matching future projects to existing installations.

Common Questions About This Sidelines Hamper Basket

Select This Tilt-Out Hamper For 21 Inch Openings

The Sidelines tilt-out wire hamper in satin nickel combines a 21 inch minimum cabinet opening requirement with 19-1/2 by 13-1/2 by 21 inch dimensions, giving clear parameters for cabinet layout. The heavy gauge 2.8 mm and 5.8 mm steel wire frame and unique, slanted rim design support dependable tilt movement with tilt-down hamper cabinet doors. Using manufacturer part number CTOHBSL-211419-SN-1 ties ordering and reordering to this exact satin nickel hamper configuration across closet, laundry, or garage cabinet runs.