Innviromass counterweight sheets from Innotec Group are dense counterbalance panels designed to provide low-cost safety solutions for off-balance products. This Type B sheet measures 27.25 inches long by 22.46 inches high by approximately 0.515 inches thick, so it delivers substantial mass in a compact footprint for furniture and casework designs. The material is made of 100 percent recycled content, which creates an eco-friendly alternative to traditional lead or steel counterweights in shop-built or production environments. Because Innviromass holds high density and heavy weight while taking up less space, it supports layouts where interior volume is limited yet stability is critical. As part of the builders hardware anti-tip solutions class, these counterweights are suited to applications where reducing tipping risk is a core requirement.
This Innviromass Type B counterweight sheet is defined at 27.25 inches in length, 22.46 inches in height, and approximately 0.515 inches in thickness, giving a consistent baseline for engineering and layout drawings. Being part of the anti-tip solutions product class means it is intended to act as a counterbalance weight in assemblies where tipping risk exists, such as furniture and storage units. Because Innviromass takes up less space while holding high density and heavy weight, it helps maintain interior clearance for drawers or components around it. The defined dimensions and flat sheet format support predictable placement inside casework, enabling repeatable positioning in production workflows.
Innviromass counterweight sheets are described as suitable for furniture such as dressers and lamps, for file cabinets, and for other off-balance objects that carry a risk of tipping. This means the 27.25 inch by 22.46 inch Type B sheet can be integrated into case goods, storage units, or freestanding fixtures where added mass improves stability. Because the product is presented as an anti-tip solution, it plays a dedicated role in helping keep tall or narrow forms grounded when loaded or opened. The ability of Innviromass to take up less space while holding high density and heavy weight supports designs where stability must be added without significantly altering exterior dimensions or usable interior volume.
The product description notes that the amount of counterweight will vary based on product design, dimensions, and weight, which places the sizing decision within the overall engineering of the finished goods. It also states that the customer producing the finished goods is responsible for determining the size, weight, and placement of the counterweight, so this sheet becomes one defined building block inside that design process. A specification drawing is required, aligning the Innviromass sheet with documented design intent and allowing the 27.25 inch by 22.46 inch by approximately 0.515 inch dimensions to be referenced accurately. The note that pieces per skid are based on product size and weight ties the material choice directly to production planning, since this Type B format carries known geometry and mass characteristics for repeat orders.
The Innviromass counterweight sheet in this Type B version measures 27.25 inches long by 22.46 inches high by approximately 0.515 inches thick, so layouts can be planned around a consistent rectangular panel.
The Innviromass counterweight sheet is described as suitable for furniture such as dressers and lamps, file cabinets, and other off-balance objects where tipping risk needs to be addressed with added mass.
The counterweight uses 100 percent recycled material, providing an eco-friendly alternative to lead or steel while still delivering high density and heavy weight in a relatively compact sheet.
The approximate 0.515 inch thickness creates a slim yet dense panel, so the counterweight can be placed in narrow cavities or behind panels without heavily reducing usable internal space.
The product description states that the customer producing the finished goods is responsible for determining the size, weight, and placement of the counterweight based on design and dimensions.
The Innviromass counterweight sheet is sold by full skid only, and pieces per skid are based on product size and weight, which aligns with planning for production quantities.
The Innviromass counterweight sheet from Innotec Group combines defined dimensions of 27.25 inches by 22.46 inches by approximately 0.515 inches with high-density, 100 percent recycled material. As an anti-tip solution for furniture, file cabinets, and other off-balance objects, it offers a compact way to add significant stabilizing mass. For projects running through Wurth Baer Supply, this Type B format provides a consistent, repeatable component that fits into documented specification drawings and production planning where counterbalance weight is a core part of the design strategy.
Sold In: 30 Each