Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Holden pull is a transitional bar pull from the Coddington collection, designed for cabinet doors and drawer fronts where the mounting holes are set at 6-5/16 inch (160 mm) centers.
The 160 mm center-to-center is the dimension that governs whether this pull fits your cabinet. It is not the overall length. The two holes in any drawer front or door are 6-5/16 inches apart, center to center, and that is the measurement this pull is built for. At 7 inches end to end, the bar extends comfortably past the posts on each side, which keeps the grip proportionate on a wide drawer bank or a two-door lower cabinet. This spacing commonly appears on wide base drawers, large pantry doors, and appliance-adjacent cabinetry where a shorter pull would look undersized against the front.
The pull is cast in zinc and finished in Brushed Satin Nickel. The brushed surface breaks up any direct reflection and gives the silver tone a matte quality that reads quieter than a polished nickel finish under kitchen lighting. Brushed Satin Nickel is a practical choice in a working kitchen because it does not telegraph every touch the way a high-polish finish does, and it coordinates with stainless appliances without competing with them. The 1/2 inch bar width keeps the profile slim, so the hardware adds structure to the front rather than mass.
This pull is sized for the wide-format hardware moments in a kitchen or bathroom renovation: a deep pot-and-pan drawer, a full-height pantry door, a vanity with an oversized center drawer. Designers specifying transitional kitchens reach for this spacing when they want the pull to hold visual weight across a wide front without scaling up to the 192 mm or 224 mm center-to-center pulls used on appliance-scale cabinetry. The Coddington collection supports a mixed-hardware approach, so it is straightforward to pair these pulls on drawers with Coddington knobs on doors and backplates behind them, all in the same Brushed Satin Nickel finish. Cabinet shops and contractors working from a hardware schedule will find the 160 mm spacing called out directly in the Coddington line, which simplifies ordering across a full kitchen run.
Center-to-center is the distance between the centers of the two mounting holes, 6-5/16 inches on this pull. Overall length is the full end-to-end size of the bar, which is 7 inches. When replacing existing hardware, match the center-to-center measurement, not the overall length.
It is a brushed finish with a low sheen, softer than polished nickel but not flat matte. It has a subtle texture that reduces visible reflections.
The Coddington collection includes companion knobs, pulls at other center-to-center spacings, and backplates in Brushed Satin Nickel, so you can mix hardware types across the same kitchen without mixing design languages.
The 160 mm center-to-center spacing is commonly used on wide base drawers and larger cabinet doors. Sizing hardware to roughly a third of the front's width is a common design guideline, though it is a preference rather than a specification.
When the widest drawers and doors in the project need a pull that fits the scale of the front and keeps a consistent finish across the room, this Coddington Holden pull in Brushed Satin Nickel delivers both.
Sold In: 1 Each