Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Holden pull is a transitional bar pull from the Coddington collection, built for cabinet doors and drawer fronts that call for hardware at the wider end of the standard spacing range. It mounts on 8-13/16 inch (224 mm) centers, a size that bridges the gap between mid-range pulls and the longest architectural spans in the series.
The 8-13/16 inch center-to-center dimension is the right choice when the drawer or door front is wide enough that a shorter pull would look lost in the middle of it. Wide base drawers, deep pot-and-pan pulls, and full-height upper cabinet doors are the most common applications at this spacing. On a bank of drawers where a 128 mm or 160 mm pull sits comfortably on a narrow front, the 224 mm version carries the same visual weight on a wider front without overcrowding it. It is also a practical spec for replacing existing hardware drilled at this spacing, since the hole centers are fixed and the pull must match them exactly.
The pull is cast in zinc and finished in Polished Nickel. Polished Nickel is a bright, highly reflective finish with a warm undertone that distinguishes it from chrome: chrome reads cooler and bluer, while polished nickel holds more warmth in the silver range. That difference matters when coordinating with plumbing fixtures, lighting, and appliance trim in a kitchen or bath. The slim 1/2 inch bar width keeps the cross-section fine rather than chunky, so the length of the pull reads as a drawn line rather than as a block of hardware.
This is a natural fit for kitchen renovations, bath vanity updates, and built-in cabinetry projects where the hardware program is Polished Nickel and the fronts are wide enough to warrant hardware at the longer end of the standard range. Designers specifying a transitional kitchen often run this spacing on wide drawer stacks while stepping down to a shorter Coddington pull on narrow doors, keeping the same series and finish throughout. Cabinet shops building to a client's specification will find the 224 mm spacing common on furniture-scale base cabinets and island drawers. Because the Coddington collection spans multiple center-to-center sizes, finishes, knobs, and backplates, the entire hardware program can be sourced from one series.
Polished Nickel has a mirror-bright, highly reflective surface. Satin Nickel is brushed to a softer, lower-sheen finish that shows fewer fingerprints. The two are the same base color family but look distinctly different in a finished room.
It mounts on 8-13/16 inch (224 mm) centers. If your existing holes are drilled to that spacing, this pull drops in without additional drilling. Measure between hole centers, not from edge to edge of the pull, to confirm.
Yes. At this length it works on wide drawer fronts and on full-height doors where the center-to-center aligns with the standard mounting position.
The Coddington series includes knobs, pulls at multiple center-to-center spacings, and backplates, so a consistent hardware program across doors and drawers can be assembled from one collection.
Choose this pull when the drawer fronts are wide, the holes are on 224 mm centers, and the rest of the hardware program calls for Polished Nickel in the Coddington collection.
Sold In: 1 Each