Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Coddington pull mounts on 8-13/16 inch (224 mm) centers, a spacing that suits wide base drawers, full-height pantry doors, and oversized drawer stacks where a shorter pull would look proportionally small. It is part of the Coddington collection and finished in Ash Gray.
The 8-13/16 inch center-to-center is one of the larger standard spacings in cabinet hardware, and it is chosen when the front itself demands a pull with visual reach. A wide base drawer, a tall two-panel pantry door, or a bank of full-overlay drawer fronts on a kitchen island all benefit from a pull that spans the width with authority rather than sitting as a small accent at the center. At this spacing the pull also distributes the pulling load across a wider span of the front, which matters on heavyweight drawers and heavy doors with solid cores. The 10-11/16 inch overall length means the ends clear the mounting posts cleanly and the bar reads as a continuous line from one side of the handle to the other.
The pull is cast in zinc and finished in Ash Gray, a cool gray with a muted, low-contrast sheen that sits in the Silver Tone color family without reading as chrome or polished nickel. The tone is close to a weathered or painted steel, which makes it a strong pairing for cabinetry in white, off-white, greige, or any gray-painted finish. Against a light front it holds quiet contrast; against a dark front it blends without disappearing. The 1/2 inch bar section keeps the profile slim, so the pull does not compete visually with the door panel behind it.
Cabinet shops finishing a kitchen with wide drawer banks and tall pantry columns will find the 224 mm spacing already on their drilling schedule for the larger fronts. Designers specifying a transitional kitchen where the hardware should read as restrained rather than decorative will find the Ash Gray and slim bar section deliver exactly that. Homeowners replacing existing 8-13/16 inch hardware can drop this pull onto the existing hole pattern without reworking the doors. Because it belongs to the Coddington collection, mixing a smaller Coddington pull on shorter drawers and this one on the wide fronts is straightforward: same series, same finish, consistent design language across the run.
Measure from the center of one mounting hole to the center of the other. This pull requires 8-13/16 inches (224 mm) between hole centers. That measurement is independent of how long the pull looks end to end.
It reads cool, sitting in the Silver Tone family. It pairs well with white, gray, and greige painted cabinetry rather than with warm wood tones or warm-tinted finishes.
The Coddington collection includes pulls in multiple center-to-center sizes, all in the same design language and available in Ash Gray. Using a shorter Coddington pull on narrow drawers and this one on wide fronts is a common approach for a kitchen with varied drawer widths.
The bar is 1/2 inch wide, a slim section that keeps the profile linear and understated at this longer length.
When the drilling plan calls for 8-13/16 inch centers and the finish needs to hold its own against light cabinetry without competing with it, this Ash Gray Coddington pull is the right fit.
Sold In: 1 Each