Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Coddington pull is a transitional bar pull for wide drawer fronts, pantry doors, and oversized cabinet faces where standard-length hardware reads as undersized.
Hardware at this center-to-center is chosen for cabinetry that would look stripped bare with a 5 or 6 inch pull. Wide base drawers, full-height pantry doors, and furniture-style islands all have fronts large enough that the hardware needs to hold its own visually. At 12 inches on center the pull spans a substantial portion of the front rather than floating in the middle of it. That proportion is what cabinet designers and kitchen specifiers are after when they move up to this scale. It also makes a practical statement on a deep drawer: the wider grip spreads the load across both hands and makes heavy pulls easier to open.
The pull is cast in zinc and finished in Polished Nickel. Polished Nickel has a warmer undertone than chrome, which reads colder and bluer in most kitchen lighting. That warmth makes it a better companion to wood cabinetry, marble countertops, and warm-white painted fronts, while still sitting firmly in the silver-tone family. The reflective surface runs continuously along the 1/2 inch bar, so at 13-7/8 inches the pull catches light along its full length rather than at two end points.
Cabinet shops running a transitional kitchen program reach for the Coddington collection when the room calls for a hardware line with a clean bar profile and enough visual authority to work at multiple scales. Because the series spans several center-to-center sizes, a shop can spec the 12 inch pull on wide base drawers and step down to a shorter Coddington pull on upper doors, keeping the same series and finish throughout. Designers assembling a kitchen where the hardware needs to coordinate with polished nickel plumbing fixtures will find this pull a straightforward match within that finish family. Homeowners replacing undersized hardware on a wide island drawer bank get a clean swap if the existing holes are drilled on 12 inch centers.
Polished Nickel has a slightly warm, golden undertone while Polished Chrome reads cooler and more blue-white. Side by side the difference is clear, and the two do not match, so choose based on the fixtures already in the room.
The Coddington collection spans multiple center-to-center sizes, so companion pulls at other spacings and knobs in the same design language are available under the same series name.
The bar is 1/2 inch wide in a slender, linear profile. The exact cross-section geometry follows the Coddington series design; the pull is not a thick or architectural-scale bar.
Yes. Bar pulls at 12 inch center-to-center are commonly used on full-height pantry doors and tall cabinet doors where the hardware needs to scale up to match the front's size.
Choose this pull when the front is wide enough that smaller hardware disappears into it, and the room already runs polished nickel fixtures that the cabinet hardware should join.
Sold In: 1 Each