Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Dustin pull is a transitional bar pull from the Coddington collection, built for cabinet doors and drawer fronts drilled on 3-3/4 inch (96 mm) centers.
The 96 mm center-to-center measurement is the standard hole pattern on a wide range of domestic cabinetry, which makes this pull the right fit for a direct swap on an existing kitchen, bath, or laundry without drilling new holes. On a drawer bank already punched to this spacing, the Dustin pull replaces the existing hardware without any prep beyond removing the old screws. It also suits a new build where the cabinet shop is cutting doors to a standard pattern, since 3-3/4 inch is a default dimension on many frameless and face-frame programs alike. The 4-3/8 inch overall length keeps the pull proportional to a mid-width drawer front or an upper door without overrunning the stile.
The pull is cast in zinc and finished in Flat Black, which is a different proposition from Matte Black in that it sits dead flat against the front with no perceptible sheen at all. On a painted or lacquered cabinet that finish reads as intentional rather than as an underspec, which is why it appears across transitional kitchens and contemporary baths where the hardware is meant to hold a line rather than catch light. The slim 1/2 inch bar section reinforces that effect: at that width the grip is present as a functional element without projecting visually off the door face.
Cabinet shops specifying a flat black hardware program find this pull useful because the 96 mm spacing drops onto a standard drill pattern, which removes a variable from the floor. Designers running a transitional kitchen with mixed elements, such as shaker fronts alongside integrated appliances, reach for flat black hardware because it ties disparate elements together without competing with them. Homeowners replacing dated hardware on an existing cabinet run drilled to 3-3/4 inch centers get a current finish without touching the doors. Because this pull is part of the Coddington collection, knobs from the same series are available for doors while this pull runs on drawers, which is the standard mixed-hardware arrangement in a kitchen.
Yes. The two values describe the same standard spacing. Both appear in pull specs depending on the manufacturer, and they describe the same hole-to-hole distance.
The bar section is 1/2 inch (13 mm) wide, which is a slim profile that sits close to the door face.
They are both low-sheen black finishes, but Flat Black is the exact catalog name for this Top Knobs finish. Finish names are manufacturer-specific and two different manufacturers' black finishes may not match visually.
Yes. This is a two-hole surface-mount pull that works on both doors and drawer fronts drilled to the same 3-3/4 inch center-to-center spacing.
When the hole pattern is already set at 3-3/4 inches and the hardware program calls for a flat, dead-black bar, this pull is the direct answer.
Sold In: 1 Each