Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Dustin pull is a transitional bar pull from the Coddington series, built for cabinet doors and drawer fronts that call for hardware at the larger end of the standard scale.
The 8-13/16 inch center-to-center is the right choice when the drawer front or door is wide enough that a shorter pull would look undersized. A wide base cabinet drawer, a full-height pantry door, or a furniture-style island front all have proportions that a 3 or 5 inch pull cannot satisfy visually. At this spacing the hardware draws a long line across the front rather than sitting as a small focal point at the center. That horizontal emphasis works especially well on horizontal-grain or flat-slab cabinetry where the hardware is meant to echo the panel rather than interrupt it.
The pull is cast in zinc and finished in Flat Black. Flat Black is a matte surface with no sheen or polish, which means it does not pick up reflections or hot spots under kitchen or bathroom lighting the way a gloss black or polished finish would. Against light-colored cabinetry it reads as a sharp contrast line. Against darker fronts it settles into the cabinetry rather than competing with it. The slim 1/2 inch section keeps the profile proportional: at nearly 9-1/2 inches overall, a heavier cross-section would feel chunky, while this one stays graphic and clean.
Cabinet shops and designers specifying transitional kitchens reach for this pull when the hardware program needs to carry across large format cabinetry without switching product families. Because it belongs to the Coddington series, the same design language and Flat Black finish extend to companion pieces in that collection, making it straightforward to run matching pulls on narrower drawers and coordinate knobs on doors without mixing aesthetics. Contractors doing a full kitchen fit-out appreciate that a single series covers multiple center-to-center spacings, so the hardware order comes from one source and one finish lot.
It is a standard spacing in the 224 mm family, found across many cabinet lines. Measure between the centers of your existing holes before ordering to confirm the match.
A matte finish like Flat Black is more forgiving than a polished surface and tends to show smudges less readily, though it still benefits from an occasional wipe-down in a high-traffic kitchen.
Yes. The collection spans several standard spacings, so you can run the same series across different drawer and door widths without changing the hardware family.
The holes are 8-13/16 inches (224 mm) apart, center to center. The pull itself measures 9-7/16 inches (240 mm) end to end, so it extends roughly 5/16 inch beyond the mounting holes on each side.
Choose this pull when the front is wide enough to deserve hardware that crosses it with purpose, and the finish program calls for a flat, non-reflective black.
Sold In: 1 Each