Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Lawrence pull is a transitional bar pull from the Coddington collection, mounted on 7-9/16 inch (192 mm) centers and sized for the wider openings in a cabinet run where a shorter pull would look undersized.
The 7-9/16 inch center-to-center is the standard spacing for pulls on wide base drawers, 36-inch sink bases, pantry doors, and appliance-adjacent panels where the hardware needs to fill the front visually without resorting to an oversized appliance pull. At this center-to-center the Lawrence bar sits across the full width of a wide drawer and anchors it, rather than floating in the middle. Cabinet shops and designers commonly step up to this spacing from the more common 5-1/16 or 6-5/16 inch centers when a wider drawer bank or a taller door calls for more hardware presence. If the existing holes in a remodel are drilled to 192 mm, this pull drops in without new drilling.
The pull is cast in zinc and finished in Honey Bronze, a warm, amber-toned gold that sits between a traditional antique brass and a contemporary brushed gold. The tone has some depth to it without a high polish, which means it coordinates well with oil-rubbed or warm-toned fixtures and holds up visually against both painted and stained wood fronts. Zinc is the standard base material across this segment and provides a consistent density and surface for the finish.
This pull is a natural fit for a transitional kitchen or bath where the hardware program runs warm and the wider cabinet fronts need hardware scaled to match. It suits designers specifying a full kitchen where some pulls are shorter and a few positions call for more reach, and cabinet shops installing on wide base drawers or tall inset doors. For a homeowner replacing hardware on a wide drawer bank already drilled to 7-9/16 inch centers, this is a direct swap in Honey Bronze. The Coddington collection carries companion pieces in the same finish, so mixing knobs on doors with this pull on drawers is a straightforward coordination.
Yes. 7-9/16 inches converts to 192 mm, which is one of the standard center-to-center spacings used for wide cabinet pulls. Both figures refer to the same hole pattern.
Honey Bronze is a warmer, amber-toned finish with less shine than a polished brass. It reads as a warm gold rather than a bright one, which makes it easier to pair with mixed metals or aged fixtures.
The Coddington series includes companion knobs and pulls in the same design language and Honey Bronze finish, so you can coordinate door and drawer hardware within one collection.
The projection is 1-3/8 inches (35 mm) from the face of the door or drawer front to the back of the grip.
Choose this pull when the drawer or door demands a center-to-center spacing that fills the front rather than one that leaves empty real estate on either side of the hardware.
Sold In: 1 Each