Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Lawrence pull is a transitional bar pull from the Coddington collection, built for cabinet doors and drawer fronts that call for hardware at the wider end of the standard range.
At 224 mm center-to-center, this pull is sized for the large-format moments in a kitchen or bath: a wide base drawer bank, a full-height pantry door, a furniture-style island front, or an appliance-adjacent panel where a shorter pull would look undersized. The 9-15/32 inch overall length gives the hardware visible presence without extending past the margins of the front. It is also the spacing that appears on wider wardrobe drawer fronts and on bathroom vanity drawers, so the application reaches past the kitchen.
The pull is cast in zinc and finished in Ash Gray. That finish reads as a desaturated silver, cooler than warm metallics like champagne or brushed brass and softer in sheen than polished nickel or chrome. On a white or light gray painted cabinet it carries just enough contrast to define the hardware without competing with the cabinetry. On a darker front it recedes and lets the wood or paint read as the primary surface. The slim 1/2 inch bar section amplifies this: even at nearly ten inches overall, the pull does not project a heavy visual footprint.
Cabinet shops specifying a full kitchen run that mixes knobs on doors and pulls on drawers will find this spacing useful on the wider drawer boxes that anchor a base cabinet run. Designers working a transitional program, where the cabinetry is neither sharply contemporary nor overtly traditional, can use the Ash Gray finish as a neutral that holds across multiple design directions without locking the palette. For a homeowner replacing hardware on an existing cabinet bank, the 8-13/16 inch center-to-center is worth confirming against the existing hole spacing before ordering, since this is a less common spacing than 96 mm or 128 mm and existing holes may not match.
It is a recognized standard spacing but less common in older cabinetry than 96 mm or 128 mm. Measure between the centers of your existing holes before ordering if you are replacing hardware without redrilling.
Ash Gray is a matte, desaturated tone rather than a metallic surface finish. It lacks the sheen of polished nickel and the cool brightness of brushed stainless, sitting instead as a flat, even gray with warm undertones stripped out.
Yes. The Coddington collection includes companion knobs, backplates, and other pulls in the same design language and Ash Gray finish.
The overall length is 9-15/32 inches (240.5 mm), which is the end-to-end measurement of the pull. The hole spacing is 8-13/16 inches. The additional length beyond the centers extends equally past each mounting hole, so plan for roughly 5/16 inch of overhang on each side.
This pull delivers the scale a wide front needs without the visual weight that scale usually carries, making it the practical choice when the hardware has to cover distance but not dominate the room.
Sold In: 1 Each