Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Langston pull is a transitional bar pull for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers with a slim half-inch bar profile in Polished Nickel.
The 5-1/16 inch (128 mm) center-to-center is one of the most widely used hole spacings in North American cabinetry, and that is where this pull earns its place. On a replacement job, it drops straight onto drawers and doors already drilled to that pattern without touching a drill. On new construction, 128 mm is a safe default for mid-width drawers, upper cabinet doors, and most standard base cabinet drawers up to 18 or 20 inches wide. The overall length comes in at 5-15/32 inches, which keeps the pull proportional to a front without crowding the stile or the edge of the drawer box.
Polished Nickel is a bright, reflective finish in the silver tone family, but it reads warmer and slightly softer than Polished Chrome. Where chrome tends to run cool and industrial, Polished Nickel sits closer to the center of the warm-cool spectrum, which is part of what makes it a natural fit for transitional interiors. The base is zinc, the dominant substrate in this catalog, and the finish is applied over it. That combination keeps the pull light in the hand while holding a surface that polishes clean without the high maintenance of a true unlacquered metal.
This pull suits a wide range of buyers for the same reason: 128 mm is a standard they are already working with. For a cabinet shop running production kitchens, specifying this spacing across a job simplifies the drilling schedule and keeps hardware interchangeable across the room. For a designer building a transitional kitchen with a mix of shaker uppers and flat-panel lowers, the slim bar profile works across both door styles without forcing a choice between contemporary and traditional hardware. For a homeowner replacing worn or mismatched hardware, matching existing 5-1/16 inch holes means no patching, no refinishing, and no re-drilling. The Coddington collection extends this pull into companion knobs and backplates in the same finish and design language, so the whole hardware program can stay in one series.
The center-to-center is 5-1/16 inches, which is the distance between the centers of the two mounting holes and the measurement you match to existing holes or use for drilling. The overall length is 5-15/32 inches, which is the full end-to-end size of the pull. The difference is roughly 3/8 inch on each end beyond the hole.
No. Both are bright silver-tone finishes, but Polished Nickel carries a slightly warmer undertone than Polished Chrome. They are different finishes and will not be an exact match side by side.
Yes. The Coddington series includes companion knobs in the same design language and finish, which is the standard way to mix knobs on doors and pulls on drawers within one kitchen.
The pull projects 1-1/4 inches (32 mm) from the face of the front to the back of the bar, providing comfortable finger clearance for everyday use.
For any project already built around 5-1/16 inch centers, this Langston pull in Polished Nickel is the direct path from hardware selection to installation, with no adaptation required.
Sold In: 1 Each