Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Top Knobs Coddington Langston pull is a transitional bar pull for cabinet drawer fronts and doors, mounting on 7-9/16 inch (192 mm) centers in a Polished Chrome finish.
The 7-9/16 inch center-to-center is one of the wider standard spacings, and it earns its place on cabinetry where a shorter pull would look lost. Wide base drawers, deep pot-and-pan drawers, full-height pantry doors, and furniture-scale island fronts are all applications where the extra span reads as intentional proportion rather than oversized hardware. On a drawer front 24 inches or wider, a pull at this spacing sits in scale with the front rather than hovering in the middle of it. It is also the spacing to match when an existing bank is already drilled at 192 mm and the goal is a like-for-like replacement without new holes.
The pull is cast in zinc and finished in Polished Chrome. Chrome at this surface quality is a mirror-bright finish: it runs as a continuous highlight along the flat bar and picks up reflections from the room around it. That brightness is what makes it coordinate so naturally with polished chrome faucets, appliance trim, and light fixture finishes already present in most kitchens and baths. Unlike a brushed finish, polished chrome does not hide marks, but it wipes clean quickly and the surface stays consistent across the collection without the tonal variation a brushed surface can show from piece to piece. The slim 1/2 inch bar section keeps the profile linear and unadorned, which is the transitional quality of the Langston design: not the minimal rod of a strictly contemporary pull, and not the decorative shaping of a traditional one.
Cabinet shops and designers specifying a transitional kitchen where the plumbing fixtures and appliances are already running polished chrome will find this pull the lowest-friction hardware decision on the project. The Coddington collection is built to give a coordinated result across door knobs and drawer pulls without mixing design languages, so the full hardware program can be resolved from one series. Homeowners replacing a wide drawer bank drilled at 192 mm centers will find it a straightforward swap. Contractors working on spec builds or renovations where chrome is the specified metal will appreciate that a 192 mm pull at this scale is stocked in the same collection as the smaller center-to-center options, keeping the sourcing consolidated.
Measure 7-9/16 inches (192 mm) between the centers of the two mounting holes. That is the drilling dimension, and it is shorter than the 8 inch overall length of the pull.
Yes. The 192 mm span works well on taller upper doors and full-height pantry fronts where a shorter pull would look proportionally small.
A polished surface picks up marks more readily than a brushed or matte finish, and wipes clean with a damp cloth. It is a trade-off most buyers accept in exchange for the brightness and fixture coordination.
The Coddington collection includes companion knobs and pulls in Polished Chrome and other finishes, so doors and drawers can be matched within the same series.
When the drawer bank is wide and the rest of the room is already running polished chrome, this Langston pull resolves both the proportion question and the finish question in one selection.
Sold In: 1 Each