Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Studio 917 Cascade Series tab pull is a compact, contemporary cabinet pull for narrow drawer fronts, small door applications, and any cabinet face where a full-length bar pull would overpower the front.
At 1-1/4 inch center-to-center, this is one of the tightest hole patterns in the cabinet hardware spectrum. That spacing exists for a reason: narrow spice drawers, small upper doors, furniture-style nightstands, and built-ins with fronts too slender to accept a longer pull without running off the edge. It also suits secondary storage in a kitchen, the narrow roll-out or filler drawer that lives beside the range, where the hardware should function without drawing attention. If you are replacing existing hardware drilled to 32 mm centers, this pull drops onto those holes directly.
The pull is cast in zinc and finished in Polished Chrome. On a tab this narrow, the polished surface runs as a bright accent rather than a broad reflective field, so it contributes light and a sense of precision without dominating the front. Chrome is a practical coordination choice: it reads as neutral against white, gray, and light wood cabinetry, and it tends to align with the faucets, appliance trims, and light fixtures already present in kitchens and baths. A polished surface will show fingerprints more readily than a brushed or matte alternative, and wipes clean just as easily.
This pull is the right call for a designer or cabinet shop specifying hardware on a project with narrow drawer banks, furniture-style built-ins, or any application where the standard 3-3/4 inch or 5-1/16 inch pull center-to-center does not fit the front. Homeowners replacing hardware on a spice rack, a bathroom vanity drawer, or a small accent cabinet will find the 32 mm spacing aligns with many existing hole patterns on smaller pieces. Because it is part of the Cascade collection, companion pulls at longer center-to-center spacings are available in the same finish for projects that mix drawer sizes across a run of cabinetry.
Yes. The tab form and the 32 mm spacing work on narrow door fronts as well as drawers. The grip is shallow at 3/16 inch wide, which suits a light pull-open motion more than a heavy door.
Most kitchen drawer pulls run at 3-3/4 inch (96 mm) or 5-1/16 inch (128 mm) centers. The 32 mm spacing is significantly shorter and is intended for small fronts where those common spacings would not fit.
The Cascade series is available in multiple center-to-center sizes in the same Polished Chrome finish, so larger drawers in the same run can use a longer Cascade pull without introducing a second design language.
The 1-3/4 inch projection is the distance from the door face to the back of the grip. Check that measurement against any adjacent framing, appliance, or open-shelf clearance on your specific installation.
Choose this pull when the front is too narrow for standard spacing and the finish needs to coordinate cleanly with chrome fixtures already in the room.
Sold In: 1 Each