Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Studio 917 Cornerstone pull is a contemporary arch-profile bar pull for cabinet doors and wide drawer fronts, mounting on 6-5/16 inch (160 mm) centers.
A 6-5/16 inch center-to-center is the step up from the standard 5-1/16 inch (128 mm) spacing and one of the most common widths specified on larger base drawers, sink base doors, and full-height pantry fronts. At this span the pull covers enough horizontal distance to make opening a heavy or deep drawer feel controlled rather than effortful. It also reads in proportion against a wider front, where a shorter pull can look undersized regardless of how good the finish is. If the existing holes are already drilled at 160 mm, this pull drops right onto them with no modification.
The arch, or bow, profile introduces a subtle curve along the bar between the two posts. That curve creates a slight visual lift compared to a straight bar pull, softening the geometry without adding bulk or ornamentation. The bar section is 3/8 inch wide, which keeps the profile trim from the front. Cast in zinc with a Matte Black finish, the surface carries a flat, even sheen that does not pick up highlights under overhead lighting. Matte Black holds its contrast against light or painted fronts and recedes into darker cabinetry, which makes the arch shape the thing the eye notices rather than the finish itself.
This pull is well suited to a contemporary kitchen, bath, or laundry room where the hardware program is black and the cabinetry fronts run wide enough to warrant a 160 mm span. Cabinet shops building drawer banks with 18 to 24 inch fronts will find this spacing proportional without stepping all the way up to the 192 mm or 224 mm options in the Cornerstone family. Designers specifying a full kitchen can pair this pull on wide drawers with a shorter Cornerstone pull on upper doors and a Cornerstone knob on narrow doors, keeping the collection consistent throughout. Contractors doing a renovation where the existing drilling is already at 160 mm can replace hardware without touching the fronts.
Measure from the center of one mounting hole to the center of the other. If that distance is 6-5/16 inches (160 mm), this pull fits without redrilling.
The arch is symmetrical between its two posts, so there is no handed orientation. It installs the same way in either direction.
The arch introduces a gentle curve along the grip bar, which softens the silhouette slightly. The mounting span, the finish, and the overall family are the same across both profiles in the Cornerstone series.
A matte surface is less reflective than a polished one and tends to show marks less prominently. It wipes clean with a damp cloth.
When the drawer or door is wide enough that a shorter pull looks lost on it, the 6-5/16 inch Cornerstone arch pull is the step up that keeps the hardware in proportion without moving to an appliance-scale span.
Sold In: 1 Each